June 4, 20251 yr 1 minute ago, stephen speak said: Good question as my msfs2024 is in drive E:\ Install it anywhere you want but community folder or program files folder like it is stated in the installation software.
June 4, 20251 yr 29 minutes ago, stephen speak said: Good question as my msfs2024 is in drive E:\ Just install it as what default shows. It installs a file in C:\FlightSimLabs2024 and the rest it installs in the community folder.
June 5, 20251 yr Congratulations on FS2024 release! Quick question: can I transfer my tech log and airframe history form MSFS to FS2024? Of course for the same livery. Thanks!
June 5, 20251 yr 4 hours ago, Krzysztof Jasinski said: Congratulations on FS2024 release! Quick question: can I transfer my tech log and airframe history form MSFS to FS2024? Of course for the same livery. Thanks! Good question. I was wondering too.
June 5, 20251 yr 5 hours ago, Fritz_Essono said: Good question. I was wondering too. Just install it as what default shows. It installs a file in C:\FlightSimLabs2024 and the rest it installs in the community folder.
June 5, 20251 yr Can we expect more liveries in the library? Currently it lacks a lot of liveries compared to Fenix base library. Thank you!
June 5, 20251 yr 15 minutes ago, Gonçalo Carvalho Santos said: Can we expect more liveries in the library? Currently it lacks a lot of liveries compared to Fenix base library. Thank you! A lot of community painters are participating in making liveries for the Fenix planes. I wonder if the liveries in the installer are closed off to just a few people.
June 6, 20251 yr 9 hours ago, Lazo Lluka said: A lot of community painters are participating in making liveries for the Fenix planes. I wonder if the liveries in the installer are closed off to just a few people. Once the paint kit gets released I am sure the community painters will have a go at it. The supplied once are done internally.
June 6, 20251 yr 36 minutes ago, Craig Baillie said: Updated paint kit is available. Has there been any changes that require a repaint if you've done anything custom?
June 6, 20251 yr 47 minutes ago, Trevor Hannant said: Has there been any changes that require a repaint if you've done anything custom? Only if it has a underwing registration.
June 6, 20251 yr 35 minutes ago, Norman Blackburn said: Only if it has a underwing registration. Can you put wing reg's on top of the wing now?
June 6, 20251 yr 6 minutes ago, Kemal Akbaba said: Can you put wing reg's on top of the wing now? You could paint them now without a fear of it being mirrored. Thats outside the scope of the paint kit however can be done with ease.
June 7, 20251 yr On 6/5/2025 at 9:11 PM, Lazo Lluka said: Just install it as what default shows. It installs a file in C:\FlightSimLabs2024 and the rest it installs in the community folder. It doest make the airframe and techlog history to transfer to the MSFS2024 version of the same livery. I installed it as default shows and the airframe shows 0 flights, 0 engines hours.
June 7, 20251 yr On 6/6/2025 at 9:20 PM, Norman Blackburn said: You could paint them now without a fear of it being mirrored. Thats outside the scope of the paint kit however can be done with ease. I want to paint on the top of the wing, which texture file should I open?
June 7, 20251 yr 47 minutes ago, 真华 梁 said: I want to paint on the top of the wing, which texture file should I open? As mentioned it is outside the scope of the paint kit. look for fsl_wing_*albd.png.dds - depending on which part and which side of the wing you need.
June 7, 20251 yr 4 hours ago, 真华 梁 said: I want to paint on the top of the wing, which texture file should I open? It then allows you to do this.
June 7, 20251 yr On 5/27/2025 at 3:09 AM, Lefteris Kalamaras said: Once we have more news on the NEO we'll share it - forgive us but some things need to be kept private until we're ready to show them off . As for the 330 - as per our previous announcements, it is on the roadmap... This is great to hear, thank you for commenting. I, personally, had been worried that the A330 had been canceled. Looking forward to it whenever it comes!
June 8, 20251 yr 7 hours ago, Norman Blackburn said: It then allows you to do this. Found the texture, it's already made
June 8, 20251 yr 7 hours ago, Norman Blackburn said: It then allows you to do this. Neo teaser :* Stoooop
June 8, 20251 yr Congratulation @Norman Blackburn @Lefteris Kalamaras and team for the MSFS2024 release. I haven't streamed for about a month now, but will for sure flight this live very soon. This is another flight for me in MSFS2024, and did you guys change something on the flight model? It feels so smooth and natural that I do not want to use AP at all and just handfly. Takeoff and especially landing have been really precise!
June 8, 20251 yr 25 minutes ago, Joel Raza said: Congratulation @Norman Blackburn @Lefteris Kalamaras and team for the MSFS2024 release. I haven't streamed for about a month now, but will for sure flight this live very soon. This is another flight for me in MSFS2024, and did you guys change something on the flight model? It feels so smooth and natural that I do not want to use AP at all and just handfly. Takeoff and especially landing have been really precise! Hello, yes, there was a LOT of fine-tuning that went in. Thank you for your kind words and be sure to enjoy streaming it!
June 9, 20251 yr On 6/7/2025 at 10:25 PM, Trevor Graupeter said: Neo teaser :* Stoooop Indeed its the A321neo wing preview.
June 9, 20251 yr Hahaha! Well I felt it really good and it was very nice feeling job well done everybody! On 6/8/2025 at 2:29 PM, Lefteris Kalamaras said: Hello, yes, there was a LOT of fine-tuning that went in. Thank you for your kind words and be sure to enjoy streaming it!
June 10, 20251 yr I love the new update. The only problems that I am having are -Decrabbing the plane on landing violently changes the direction of the plane at touchdown -Nose lift up behaviour at landing very sensitive? (When I try to flare the nose, the nose easily goes up in the air again with little input) -(Cosmetic) The cabin should have the same „view“ as the cockpit, so you can basically walk into the cabin from the cockpit, instead of the outside view, if you know what I mean. …And damn that gear down thump sound was so satisfying to hear Regards
June 14, 20251 yr 17 minutes ago, Rodrigo Andres Jipoulou Saez said: When I enter fscontrol I don't see the update? At the moment it's part of the experimental channel. If you switch to that via the Settings, you should then see it.
June 15, 20251 yr 10 hours ago, Rodrigo Andres Jipoulou Saez said: OK When will we have information on the A321neo? We're still working on it as we've said - sorry I don't have much more news to say at the moment, I know everyone's really looking forward to it!
June 15, 20251 yr 5 minutes ago, Rodrigo Andres Jipoulou Saez said: Are they in development or beta testing? Rodrigo, Please stop it. We have answered this question many times in general and to you specifically more than a couple of times. Asking over and over again will not make things any quicker.
June 15, 20251 yr 11 minutes ago, Norman Blackburn said: Rodrigo, Please stop it. We have answered this question many times in general and to you specifically more than a couple of times. Asking over and over again will not make things any quicker. We are all eager to get this..me personally am eager to get the HWI so I can actually use these and find out what they’re all about with skalarki hardware
June 15, 20251 yr 1 minute ago, stephen speak said: We are all eager to get this..me personally am eager to get the HWI so I can actually use these and find out what they’re all about with skalarki hardware The soonest we can Stephen!
June 15, 20251 yr 5 minutes ago, Norman Blackburn said: The soonest we can Stephen! I know @Norman Blackburn..all takes time to get things right..I’ve always got my p3d so nowhere near stuck
July 30, 20251 yr When I opt for the Experimental Channel in the "Center" Settings, I get a warning for the aircraft saying that the version in the Server and the one installed aren't the same and I have to revert to the Server version? Yesterday I tried Experimental for the first time to get the version of the 321 ending in 310 and couldn't install it 😕 I opted for the Experimental Channel in the Settings.
July 30, 20251 yr 1 hour ago, Jose Monteiro said: When I opt for the Experimental Channel in the "Center" Settings, I get a warning for the aircraft saying that the version in the Server and the one installed aren't the same and I have to revert to the Server version? Yesterday I tried Experimental for the first time to get the version of the 321 ending in 310 and couldn't install it 😕 I opted for the Experimental Channel in the Settings. Have you got the tab open on the top right for P3D??
July 30, 20251 yr 2 hours ago, stephen speak said: Have you got the tab open on the top right for P3D?? Will check. I'm on FS 2024, P3D is long uninstalled, and I see it as a wrning ( "!" ) next to each of the installed FS 2024 A321 modules.
July 30, 20251 yr 34 minutes ago, Jose Monteiro said: Will check. I'm on FS 2024, P3D is long uninstalled, and I see it as a wrning ( "!" ) next to each of the installed FS 2024 A321 modules. The (!) means it needs updating..click on update all top right and it should work
July 30, 20251 yr 1 hour ago, stephen speak said: The (!) means it needs updating..click on update all top right and it should work Did that, it updated, but there a message saying the version on Server side is older than the one I just pushed (...310 in this case) and that I should rollback. That's what confused me because I opted for the Experimental Channel. But tonight I will see if I can further investigate it ! Thank you for your support, and I will report back if/when I find the solution 👍
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.