Mengbaby Posted May 25, 2019 Posted May 25, 2019 hi! The lights are not good, the night landing lights, the strobe lights are not working, the strobe lights are small, the landing lights and the strobe lights are not shining on the ground, is that a problem with dynamic lighting? spotlights is the latest version,The ceiling light is not bright enough, the lighting effect is very bad, the floodlight is not bright enough, I am very depressed。 Thank you for your help!Look, the light doesn't come on at all Quote
Sabine Meier Posted May 25, 2019 Posted May 25, 2019 Have you turned the flood lights on the center pedestal on. Have you switched the dome light on the overhead panel. Quote
Scott Wilson Posted May 25, 2019 Posted May 25, 2019 p3d has a fix max of dyn lights in the cfg file. If you are at an airport with lots of dynamic lights and a traffic tool like Ultimate Traffic live then I get this. Try starting a new scenario at night in a small default airport somewhere and see if that helps. Dyn lighting is still a bit bugged when maxed out. Quote
Mengbaby Posted May 25, 2019 Author Posted May 25, 2019 1 hour ago, koen meier said: Have you turned the flood lights on the center pedestal on. Have you switched the dome light on the overhead panel. Yes, I did, but it didn't work Quote
Mengbaby Posted May 25, 2019 Author Posted May 25, 2019 1 hour ago, Scott Wilson said: p3d has a fix max of dyn lights in the cfg file. If you are at an airport with lots of dynamic lights and a traffic tool like Ultimate Traffic live then I get this. Try starting a new scenario at night in a small default airport somewhere and see if that helps. Dyn lighting is still a bit bugged when maxed out. Can you tell me how to do it Quote
Scott Wilson Posted May 25, 2019 Posted May 25, 2019 First start a new scenario from the p3d menu at night in a small default airport with the a320 and see if your lights are working . Quote
Mengbaby Posted May 26, 2019 Author Posted May 26, 2019 17 hours ago, Scott Wilson said: First start a new scenario from the p3d menu at night in a small default airport with the a320 and see if your lights are working . Changing airports is no better!Basically be lamplight is usable, it is brightness is insufficient, do not have reflex effect! Quote
Norman Blackburn Posted May 26, 2019 Posted May 26, 2019 Which version of the 320x is installed? Which Version of Spotlights is installed? When using a default plane do you see a little icon in the bottom left corner of the screen? Quote
Mengbaby Posted May 27, 2019 Author Posted May 27, 2019 15 hours ago, Norman Blackburn said: Which version of the 320x is installed? Which Version of Spotlights is installed? When using a default plane do you see a little icon in the bottom left corner of the screen? FSLabs_A320X_P3D_v2.0.2.352 FSLabs_SpotLights_v2.0.0.15 I did not see the small icon in the lower left corner. I repeatedly reinstalled the program, but it still did not work! Quote
Sabine Meier Posted May 27, 2019 Posted May 27, 2019 You just hidden the icon. As long as it is visible in the addons tab you are good. Quote
Mengbaby Posted May 27, 2019 Author Posted May 27, 2019 58 minutes ago, koen meier said: You just hidden the icon. As long as it is visible in the addons tab you are good. No open hide, you look at the picture, I think the spotlight is not being used! Quote
Søren Dissing Posted May 27, 2019 Posted May 27, 2019 Spotlights IS being used! However, in the FSLabs products the small icon is not visible since it is not needed, all light controls are integrated in the aircraft. Quote
Mengbaby Posted May 28, 2019 Author Posted May 28, 2019 11 hours ago, Søren Dissing said: Spotlights IS being used! However, in the FSLabs products the small icon is not visible since it is not needed, all light controls are integrated in the aircraft. Thank you for your answer!But so far the spotlight has had no effect! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.