Jump to content

Spotlight Config Files To Be Shared With The Community


Bob L

Recommended Posts

  • 2 months later...
Posted

Included are my 737NGX_Colors.ini file that tweaked the colouring of the PMDG B738 and the FSLSpotLights.ini file for lighting. Both are for P3D4.

REMEMBER TO BACKUP YOUR FILE BEFORE REPLACING THEM~!!

  1. The 737NGX_Colors.ini file goes to c:\Lockheed Martin\Prepar3D v4\PMDG\PMDG 737 NGX\
  2. The FSLSpotLights.ini file goes to c:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\PMDG 737-800NGX WL\
  3. ...or ... c:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\PMDG 737-800NGX\ ==> not sure if they will work with the -900s

Happy flying!

B738.jpg

B738_Lights.zip

  • Like 4
Posted

Will these old v1.0 presets work with the new FSLabs Spotlights v2.0? Anyone have any presets for the PMDG 777 and 747?

  • 2 weeks later...
Posted

A set of low contrast night cockpit lights for the PMDG 737 series. 600/700/800 & 900 variants. Instructions included. These files are for FSL Spotlights V2 and therefore will work with P3D v4. Instructions included from within the .zip file

2017-10-27_15-5-31-277.thumb.jpg.50eb67118ed7a9c21b258917d412a251.jpg

2017-10-27_15-6-0-44.thumb.jpg.283aa94f39099db230a37e4b20c814af.jpg

 

FSSpotlight Profiles PMDG737.zip

  • 1 month later...
Vasilios Grekousis
Posted

Need the FSL A320 configs...  Can any one share? 
All I see is Aerosoft... :S

  • Like 1
Norman Blackburn
Posted
On 20/12/2017 at 10:54 PM, vasgr said:

Need the FSL A320 configs...  Can any one share? 
All I see is Aerosoft... :S

Why when they are already installed with the 320X?  Also please change your forum name to be your real first and last names.

Posted

bumping for a 747 v3 pmdg config file.  thanks

  • 1 month later...
georgiosgiannoukos
Posted

Hi, someone has a spotlight zip file for the 737-800 NGX for the latest spotlight version for P3d 4.2?

Posted
2 hours ago, Georgios Giannoukos said:

Hi, someone has a spotlight zip file for the 737-800 NGX for the latest spotlight version for P3d 4.2?

The files for v4 are the same. You can use these ... see 5 posts up :) 

FSSpotlight Profiles PMDG737.zip

georgiosgiannoukos
Posted

Thanks so much. I haven't done anything yet but please explain me. Copy the file to the pmdg. I understand that. BUT to rename it to FSLSpotlight.ini, after I paste it in the pmdg folder?

Sorry I cants understand. Please advise

Posted
3 hours ago, Georgios Giannoukos said:

Thanks so much. I haven't done anything yet but please explain me. Copy the file to the pmdg. I understand that. BUT to rename it to FSLSpotlight.ini, after I paste it in the pmdg folder?

Sorry I cants understand. Please advise

This is correct. The problem is that every Config file for every aircraft is called FSLSpotlights.ini ... just located in their own aircraft folder. So distributing 4 different config files in the same archive is difficult because they would all have the same filename! Hence choose the right one, place it in the correct folder and rename. :)

georgiosgiannoukos
Posted

Nick thank you, I only use 737-800 NGX WL , so I will choose the appropriate file paste and rename it to “FSLSpotlights.ini” that’s all

George

Posted

Somehow, somewhere, my spotlight files don't work after latest update of SL ... my PMDG B738 remains dark and I see the little red circle to up or down brightness is gone. If I open Spotlights all the different cameras are there and they all seem to be okay but in P3D4.2 the cockpit is dark.

 

<-sigh->

georgiosgiannoukos
Posted

Hi, either mine, not working, even I’m licensed for the spotlights, I had a zip file for the 737-800 NGX and still no difference. As For A320-X as they say we don’t need to configure anything. Every light is set by default from the program. 

Posted
38 minutes ago, Georgios Giannoukos said:

Hi, either mine, not working, even I’m licensed for the spotlights, I had a zip file for the 737-800 NGX and still no difference. As For A320-X as they say we don’t need to configure anything. Every light is set by default from the program. 

Have you definitely got the right version? There are 2 versions floating about here .... one for version 1 and a newer one for version 2 (they're not compatible). In the instruction text file ... does it specifically say "FS Spotlight v2 Profiles" ?

Posted
1 hour ago, Nick Kidd said:

In the instruction text file ... does it specifically say "FS Spotlight v2 Profiles" ?

I'm a bit lost with this ... I have 2.0.0.7 installed and my spotlights for the PMDG B738 and Majestic Q400 don't work with the latest version 2.0.0.7 ...

Will have to make them all over again??

Posted
3 minutes ago, Terblanche said:

I'm a bit lost with this ... I have 2.0.0.7 installed and my spotlights for the PMDG B738 and Majestic Q400 don't work with the latest version 2.0.0.7 ...

Will have to make them all over again??

I had an issue where the manager says I'm a registered user but in sim it said it was a trial. Try DE-registering your Spotlights and then re-registering. V2 profiles should work with the latest version fine - mine do. Version 1 profiles won't work in v2 however ... and some people dig up v1 profiles and wonder why they don't work. 

Posted
50 minutes ago, Nick Kidd said:

I had an issue where the manager says I'm a registered user but in sim it said it was a trial

Aaaaah that makes sense ... will double check next time.

Posted

hello.

im looking for a pmdg 747 v3 config file.  does anyone have one ??

thanks 

Posted
22 hours ago, Nick Kidd said:

manager says I'm a registered user but in sim it said it was a trial

That was it ... reentered the activation code within P3D4 and all is good to go!

PS: Can't wonder what FSLabs means when you enter your activation code in SL and a message comes up that says, "FSLabs are using tracking software ..." - in the light of everything that happened this week they may have to reconsider their wording and /or definitions. #justsaying

  • 3 months later...
  • 1 month later...
Darien Barnes
Posted

Does anyone happen to have one for the Captain Sim 757? Thanks in advance!

  • 3 weeks later...
Posted

Ok I am a newbie, where does the spotlight.ini file go for each specific airplane?

 

Thanks

Norman Blackburn
Posted

In the same folder as the aircraft.cfg for the plane you are adding spotlight to.

  • 2 weeks later...
Nawfal Emad
Posted
On 5/30/2018 at 7:26 PM, Svyetoslav Kobelyev said:

My config for QW Boeing 787-8

Do you have one for the -9? Looks great BTW.

 

Svyetoslav Kobelyev
Posted
On 7/29/2018 at 10:36 AM, Nawfal Emad said:

Do you have one for the -9? Looks great BTW.

 

QW 787-9

FSLSpotLights.ini

  • 1 month later...
Posted

Hi Gentlemen,

Thank so much for all these great spotlight presets, I am new at this and I do not know how to install then, is there any read file that I may have?

 

Regards

Jose

  • 3 weeks later...
Abderrafik Asseban
Posted

Hi all,

Anyone happens to have the profiles for all the feelthere embraer series (170/175/190/195 as well as 145)?

Thnx!

  • 1 month later...
Edward Stefanovich
Posted
On 3/5/2015 at 6:12 AM, L-a_u_r^i S-i_v*u-o-j^a said:

Hi guys,

I've been working to get thes ini files for you. More will come today :)!

For now I have included:

PMDG 777-200LR

PMDG 777-300ER

PMDG 777F

SpotLight_Lauri_Pack#1.zip

 

 

 

 

 

Thanks for sharing. 777-200LR Dome Lights are not working. Any suggestions?

 

Posted
20 hours ago, skysurfer said:

Thanks for sharing. 777-200LR Dome Lights are not working. Any suggestions?

 

It looks like them ini files were made March 2015 very old

Edward Stefanovich
Posted

Ah I see. Time to experiment myself then :) 

  • 1 month later...
Posted

Finished Embraer 175!!!!

* Tail Logo

* Panel

* high-intensity discharge (HID) BoomBeam Landing Lights

 

:P:P:P

  • Thanks 1
  • 2 weeks later...
S_T_E_V_E S_U_M_M_E_R_S
Posted

Hi,

anyone out there completed a PMDG 737-700WL for P3Dv4.4?

@David Murden did a real beaut for the 800WL version, which I have.

I tried @L-a_u_r^i S-i_v*u-o-j^a files from 2015 but they're not working for P3Dv4.4

Tried to edit for the 700WL myself, but to no avail.

Thanks & regards,

 

Rgds,

 

Steve

Posted
2 hours ago, S_T_E_V_E S_U_M_M_E_R_S said:

Hi,

anyone out there completed a PMDG 737-700WL for P3Dv4.4?

@David Murden did a real beaut for the 800WL version, which I have.

I tried @L-a_u_r^i S-i_v*u-o-j^a files from 2015 but they're not working for P3Dv4.4

Tried to edit for the 700WL myself, but to no avail.

Thanks & regards,

 

Rgds,

 

Steve

1

Thank you @S_T_E_V_E S_U_M_M_E_R_S for the kind words, am more than happy to always share my work. Enjoy! 

Edward Stefanovich
Posted

Greetings. 

Does anybody have for PMDG 777 P3D 4.4

Thank you 

  • 1 month later...
Alan Norris
Posted
On 1/3/2019 at 10:03 PM, maxiseba said:

Finished Embraer 175!!!!

* Tail Logo

* Panel

* high-intensity discharge (HID) BoomBeam Landing Lights

 

:P:P:P

Care to share?! :)

Posted

is there any profile for FSLabs A320X?

Sabine Meier
Posted
32 minutes ago, jatin deep said:

is there any profile for FSLabs A320X?

The fslabs airbusses natively support fsspotlights. 

  • 2 months later...
Wanthuyr Filho
Posted

Also looking for a complete light set for PMDG Boeing 777-300ER.

Thanks!

  • 1 month later...
Michael Fischer
Posted

FSLABS A320

This is it like I know the lighting and atmosphere on the A320 Flightdeck:

(Should work for A319, not tested yet)

Main panel and Pedestal flood:

2019-6-29_2-29-21-885.thumb.jpg.e02f0c15d8cb923328c44fb00565c3c7.jpg

 

Main Panel + Pedestal flood + Dome dim:2019-6-29_2-39-7-826.thumb.jpg.3f75c18d11fec0180c98d3cb9e66f55a.jpg

 

Dome dim only:

2019-6-29_2-37-39-871.thumb.jpg.f9681d70252327cad23b8ff8d62dc64f.jpg

 

Dome bright only:

2019-6-29_2-37-43-915.thumb.jpg.7ef39b36de72d0932134c1680a94d1e8.jpg

Dome bright + MIP flood + Pedestal flood:

2019-6-29_2-44-3-455.thumb.jpg.4d493977a6b808a4513abbdecbbae34b.jpg

 

2019-6-29_2-29-58-369.jpg

FSLSpotlights.ini

  • Like 3

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...