Stu Antonio Posted December 21, 2021 Posted December 21, 2021 You could add that it‘s Hotfix 1 for P3Dv5.3 …. Let‘s also add a link to the official announcement: https://www.prepar3d.com/news/announcements/2021/12/120943/ Quote
Marcus Barrett Posted December 21, 2021 Posted December 21, 2021 Im guessing as always the Fslabs will not work until updated? Quote
Duncan MacKellar Posted December 21, 2021 Posted December 21, 2021 15 minutes ago, Marcus Barrett said: Im guessing as always the Fslabs will not work until updated? Correct. Quote
Rado Sutto Posted December 21, 2021 Posted December 21, 2021 More info about P3D - https://www.prepar3d.com/news/announcements/2021/12/120943/ ... and A320X needs update... 1 Quote
Dave Taylor Posted December 21, 2021 Posted December 21, 2021 P3Dv5.3 HF1 available now. https://www.prepar3d.com/news/announcements/2021/12/120943/ I'm waiting a while................. Quote
Garry van 't Padje Posted December 22, 2021 Posted December 22, 2021 Waiting a while? Are you staring at the announcements page spamming F5? You should check on your close ones……. Quote
Benny Wong Posted December 22, 2021 Posted December 22, 2021 Based on the list most of the fix are either irrelevant or too minor for me Quote
Stu Antonio Posted December 22, 2021 Posted December 22, 2021 Guys, that's the third topic about this, one is just two below... Can we have them merged? 1 Quote
Stu Antonio Posted December 22, 2021 Posted December 22, 2021 I hope for the haze fix to work, not minor at all for me... 1 Quote
Bernd Edlinger Posted December 22, 2021 Posted December 22, 2021 I am still unsure if I should go with 5.3 I am so happy with 5.2. Works so smooth Quote
Jonja Merck Posted December 22, 2021 Posted December 22, 2021 37 minutes ago, Bernd Edlinger said: I am still unsure if I should go with 5.3 I am so happy with 5.2. Works so smooth I would wait. Just had to reinstall the whole sim because of instability. Quote
MATT GLOVER Posted December 22, 2021 Posted December 22, 2021 Haze is fixed. AS working ENV update today just waiting on FSL next Quote
Patrick Hildebrand Posted December 22, 2021 Posted December 22, 2021 But there will be a Hotfix for the Hotfix V5.3 HF1 - Airport effects/lights are stuck ON - Prepar3D Forums 1 2 Quote
Jean-Michel QUENTEL Posted December 22, 2021 Posted December 22, 2021 Hello to all the Team, P3Dv5.3 HF1 is released. I suppose you'll update the A320 when you'll have time to do this. Thanks in advance for your efforts. Best Regards Jean-Michel Quote
Andre Heilscher Posted December 22, 2021 Posted December 22, 2021 1 hour ago, Patrick Hildebrand said: But there will be a Hotfix for the Hotfix V5.3 HF1 - Airport effects/lights are stuck ON - Prepar3D Forums OK, it's like the same with every software vendor... patching one issue will cause another. But this one, with lights on all the day isn't really good for environment Quote
brendon powys Posted December 22, 2021 Posted December 22, 2021 looks like they fixed the shimmering effect on runways and taxi lines. Hoping anti aliasing is fixed as well. I've been battling this AA for past year with no success .p3dv5 has been a pain for me Quote
Eric Fisher Posted December 22, 2021 Posted December 22, 2021 They are going to be pushing an update to the Client to fix the lights on in daytime bug. Seems to be like it will be a quick HF incoming to address it. Makes sense for FSL to wait for the HF for the HF. It may even hit today or tomorrow but by next Tuesday at the latest I suspect. 1 Quote
phil highton Posted December 22, 2021 Posted December 22, 2021 Oh here we go again update anxiety 1 Quote
Graham Collins Posted December 22, 2021 Posted December 22, 2021 I'm quite happy with V4.5 HF3 so do not have to worry about any of this..... Quote
Eric Fisher Posted December 23, 2021 Posted December 23, 2021 From Rob at P3D: Hello everyone, The downloads page has been updated with the new version with this fix. The new version is 5.3.15.28131 as opposed to 5.3.15.28130 which was the original hotfix. Only a client update is required. 1 Quote
Bernd Edlinger Posted December 23, 2021 Posted December 23, 2021 4 hours ago, Eric Fisher said: From Rob at P3D: Hello everyone, The downloads page has been updated with the new version with this fix. The new version is 5.3.15.28131 as opposed to 5.3.15.28130 which was the original hotfix. Only a client update is required. I hope FSLabs will do an update before the christmas holidays (i guess they do, cause they are awesome :P) or it will be lonely christmas holidays A sim without FSLabs is no real sim 2 Quote
Peng Jia Posted December 23, 2021 Posted December 23, 2021 next year road map christmas please,especially concorde. Quote
A_ndré_F_olkers Posted December 23, 2021 Posted December 23, 2021 Would be great to have an update for the experimental version Quote
Kamenko Gnjatovic Posted December 23, 2021 Posted December 23, 2021 An update for the Busses today would save the Christmas days.. Please! Regardless of that folks and FSLabs-Team, have a nice Christmas and stay healthy! Regards Quote
Eric Fisher Posted December 23, 2021 Posted December 23, 2021 Yeah, I have extra days off and would like to upgrade from 5. 2 but don't think my wishes and FSL time-line will converge. Shame... Quote
Bernd Edlinger Posted December 23, 2021 Posted December 23, 2021 Thanks a lot! Merry Christmas to everyone! Quote
Stu Antonio Posted December 23, 2021 Posted December 23, 2021 Thanks guys!!! Btw, is there a detailed changelog somewhere of what those "multiple FMGC updates" are? Quote
Duncan MacKellar Posted December 23, 2021 Posted December 23, 2021 Just now, Stu Antonio said: Thanks guys!!! Btw, is there a detailed changelog somewhere of what those "multiple FMGC updates" are? Yes, in the Product Panel before you updated, as well as via the Open Read me button for the product (A320). 1 Quote
Rafal Haczek Posted December 23, 2021 Posted December 23, 2021 Tonight I'm asking my fellow FSLabers for help. Now that the P3Dv5.3-HF1-fix1 is out, I have finally decided to do a full (clean) P3D reinstal (going from P3Dv5.2). I admit I haven't used the FSL Control Centre so far, as I use unsupported mods (e.g. VC cockpit textures), and didn't want to mess with them. But I can see there are no official downloadable FSL A32X installers as there used to be (or are they?), so FSLCC is a must now. So, what is the proper order to do what I intend to do? Should I go as follows? 1. Install FSLCC 2. Uninstall the buses (I have all versions) with it 3. Uninstall P3Dv5.2 4. Install P3D v5.3 5. Install the buses with FSLCC? Or maybe it should be done differently? Thanks in advance for your help,Rafal Quote
Holger Teutsch Posted December 24, 2021 Posted December 24, 2021 11 hours ago, Rafal Haczek said: Tonight I'm asking my fellow FSLabers for help. Now that the P3Dv5.3-HF1-fix1 is out, I have finally decided to do a full (clean) P3D reinstal (going from P3Dv5.2). I admit I haven't used the FSL Control Centre so far, as I use unsupported mods (e.g. VC cockpit textures), and didn't want to mess with them. But I can see there are no official downloadable FSL A32X installers as there used to be (or are they?), so FSLCC is a must now. So, what is the proper order to do what I intend to do? Should I go as follows? 1. Install FSLCC 2. Uninstall the buses (I have all versions) with it 3. Uninstall P3Dv5.2 4. Install P3D v5.3 5. Install the buses with FSLCC? Or maybe it should be done differently? Thanks in advance for your help,Rafal Install FSLCC run FSLCC, it removes old installers, installs current version of the busses, you end with a working system deinstall p3d V5.2 install p3d V5.3HF1 done. Hopefully with "(clean)" install you don't mean wiping the p3d folder(s). Besides generating a lot of work I don't see much beneifit. 1 Quote
Rafal Haczek Posted December 24, 2021 Posted December 24, 2021 36 minutes ago, Holger Teutsch said: run FSLCC, it removes old installers, installs current version of the busses deinstall p3d V5.2 install p3d V5.3HF1 Aaah, OK, so it is safe to install the latest version of buses PRIOR TO dealing with the sim upgrade. I get it now. Thanks a lot, Holger! Quote
Holger Teutsch Posted December 24, 2021 Posted December 24, 2021 Guys, be aware that Chaseplane does not yet support the updated 5.3HF1 installer. 1 Quote
Stu Antonio Posted December 24, 2021 Posted December 24, 2021 35 minutes ago, Holger Teutsch said: Guys, be aware that Chaseplane does not yet support the updated 5.3HF1 installer. Actually it does support HF1, just not HF1-Update1 yet. Although it still works, just the smooth transitions and static external camera are INOP atm. 1 Quote
Robin Locher Posted December 24, 2021 Posted December 24, 2021 36 minutes ago, Holger Teutsch said: Guys, be aware that Chaseplane does not yet support the updated 5.3HF1 installer. yes but it workes with reduced functions 2 Quote
Lothar Gentzsch Posted December 24, 2021 Posted December 24, 2021 is it correct ? In my Controlcenter is updated to Version ...0186 the FSLibraries and the Airbus A320X only. The A319X, the A321X, the A320-X-SL, the A321-x-SL remained on Version.......184 ? My Controlcenter is Version 1.0.0.8 Quote
Norman Blackburn Posted December 24, 2021 Posted December 24, 2021 9 minutes ago, Lothar Gentzsch said: is it correct ? Yes this is correct. 1 Quote
Stu Antonio Posted December 25, 2021 Posted December 25, 2021 On 12/24/2021 at 10:42 AM, Holger Teutsch said: Guys, be aware that Chaseplane does not yet support the updated 5.3HF1 installer. Chaseplane is now updated for HF1-UD1. 3 3 Quote
Mohamed BOUKHETIR Posted December 26, 2021 Posted December 26, 2021 When will a public channel update for the FSLabs A320-X be released? Quote
Norman Blackburn Posted December 26, 2021 Posted December 26, 2021 1 hour ago, Mohamed BOUKHETIR said: When will a public channel update for the FSLabs A320-X be released? All of the team are enjoying the festive break. As such you shouldn't expect to see it or even news about it during this time. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.