Search the Community
Showing results for tags 'Concorde X'.
-
I ran into slight trouble this morning, I had Concorde X for about 4 years and I never had time or did any effort to master it. Last night I was watching some Concorde videos and that motivated me to spend some time in Concorde X and learn the systems. This morning when I loaded Concorde X, it had no instruments and no landing gear. Does anyone know why it happened? By the way I’m using FSX SP2 ( I hardly use fsx this days) Also I can’t seem to post anything in Concorde sections of the forum.
-
Version 1.0.0
415 downloads
FSX British Airways concorde x repaint, this is HD and creates more realism than the default textures, when in-flight the concorde had to be painted in special due to heat build up on the fuselage at mach 2.2, the concorde had a maximum speed over twice the speed of sound at Mach 2.04 (1,354 mph or 2,180 km/h at cruise altitude), with seating for 92 to 128 passengers. these are textures only. by kelvin keeble-
- concorde x
- British airways
-
(and 2 more)
Tagged with:
-
Hi everyone! my old laptop suddenly abandoned me and with it it's gone my Concorde X (files, serial numbers, etc...) and of course on my email account i can't find a trace of the email from when i purchased Concorde X. Is there any way to find my serial key and download it again? Thanks in advance for your help!
- 4 replies
-
- Concorde X
- Serial Key
-
(and 2 more)
Tagged with:
-
When comes the update for the concorde for p3d v4? Best regards!
-
Hi, im all new in this thing of flight simulation and started by the FSX steam edition, after learning a bit i decide to fly other airplanes and then i find concorde X, but flight simlabs dont sell it anymore : ( Started looking around for outher versions and find some sort of "cracked" version of the concorde X intalled with out problems but when its time to fly plane it simply does not work AT ALL! every thing its black in the cockpit and commands to see the 2D controlers just give me black stuff on my screen. The outside of plane have bugs too its on the ground but no gear down, the co
- 1 reply
-
- 2
-
-
-
- Concorde X
- error
-
(and 2 more)
Tagged with:
-
Hi there, Around a week ago I started having some issues with my Concorde X installation. Panels weren't operating properly, for example, when ground power was requested, the ground power light would not become lit on the AC electrics panel. I also was not able to load a panel state like cold & dark or preliminary. Following these issues I deleted all of the FsLabs Concorde X files and uninstalled it from the control panel, this however, didn't work. I reinstalled FSX but to no prevail. I did get close to having it properly start up with the master warning pings and engine noise almos
-
Hi, I was re-downloading my Concorde X after I reset my Computer and I was stumbled with this message. Can someone direct on how to download this?
-
Hi everyone! I'm new on the blog and I was just wondering if someone was kind enought to help me to understand how create new Concorde liveries with photoshop and with real images (like a tutorial). It will sure help others too and fill the repaint folder with new and interesting Concorde liveries! Thanks to everyone who will respond! Andrea =)
-
- Help
- Concorde X
-
(and 2 more)
Tagged with:
-
Concorde X P3D crash to desktop ("ContentErrorLog")
Abdelmalik Berrada posted a topic in General Forum
Hi everybody, Please, can you help me ? Everytime, in P3D, a few minutes after I start a flight with Concorde x, the simulator crashes to desktop. Before crashing, a message is displayed telling me I have to verify my "ContentErrorLog.txt" file. There are the errors : What should I do ? ContentErrorLog.txt -
Colin Drew posted 20/02/18 20:49 Clicking on the executable, with or without admin rights, with or without Bitdefender on, with or without the file location being located on different drives.fails to install Concorde X. The "working Icon animates and for a brief moment, the install Icon shortcut appears visible in the toolbar momentarily. Then nothing, no sign of continued execution. No error or warning messages. No dialogue boxes.No opportunity to chose an install path. I have many, many add-ons and this is the first time I get nowhere in the progress of the install. I posted
-
Hi, I am an owner of Concorde X for FSX. Since I am no longer using FSX I did not kept my licenses. However I would need it to register as an owner on this forum. Anyway to find it back ? Regards PS: Can't access my email address from this time.
-
Hello, Yesterday I received Concorde X (boxed edition) after purchasing it from Aerosoft. i installed it, but whenever I selected it in the FSX menu (FSX Steam Edition) the game would crash. I reinstalled it and this time I managed to select it, but now when I load the flight FSX crashes at 3% loading. I have CIVA INS installed, and I have checked multiple times and do not have any of the conflicting windows updates that I know of. Any help would be appreciated, because I would love to fly this beautiful plane. Thanks, Colin
-
A while ago I made a post about the reheats not igniting properly on takeoff. Unfortunately, this issue is still happening. I made absolute certain that the P7 bugs and fuel flow were set properly, and I used the Concorde Performance Calculator to do this. I slam the throttles forward, and I hear the afterburner rumble briefly, but then it goes quiet and the plane is yanked to the right (I correct it with left rudder). The middle 2 reheats engage, but the outer 2 don't engage almost until V1. It's really strange, and I've tried everything. What can I do now?
- 2 replies
-
- reheats
- concorde x
-
(and 1 more)
Tagged with:
-
Hello, don`t know where to ask, so I´m sorry if this is the wrong Place. I got no Answer to my Support Ticket 417503 for 7 Days now. Is the Support System down. What should i Do?
-
I've already started a support tickect on my issue but I'm having little progress with that so I want to make a forum topic. The support ticket told me to follow these instructions, which I did but the same problem still occurs. https://forums.flightsimlabs.com/index.php?/topic/6820-installation-instructions-for-fsx-and-p3d/ So my problem is I'm having a problem when trying to install the Concorde X for FSX:SE. (v1.39)It happens at the same point and time where I get to the point where I am asked to input my licence key. I copy in paste my key. Then, I click next. Rig
-
- crash
- concorde x
-
(and 2 more)
Tagged with:
-
Hi (I'm french excuse my english), So i have buy concorde last years but i have all time same problem : When i load aircraft on P3D V3, my aircraft dont want start normaly... When i try to load ready to taxy on P3D menu same problem .... I have the last version concorde x 1.39. If you ave any idea about his probleme ?
- 5 replies
-
- concorde x
- load
-
(and 1 more)
Tagged with:
-
British Airways FSX Concorde X View File FSX British Airways concorde x repaint, this is HD and creates more realism than the default textures, when in-flight the concorde had to be painted in special due to heat build up on the fuselage at mach 2.2, the concorde had a maximum speed over twice the speed of sound at Mach 2.04 (1,354 mph or 2,180 km/h at cruise altitude), with seating for 92 to 128 passengers. these are textures only. by kelvin keeble Submitter kkeeble741` S
-
- concorde x
- British airways
-
(and 1 more)
Tagged with:
-
I noticed there are disc versions on sale and wanted to know what if it would be the latest version if I bought it from a disc
-
my concorde keeps crashing during flights and when im on the ground, it keeps coming up error with concorde installation, but i have uninstalled it and reinstalled but i have the same problem, i have version 1.32
- 14 replies
-
- concorde x
- crashing
-
(and 1 more)
Tagged with:
-
Concorde X soundset View File Concorde Sound Package. A realistic sound pack for the Olympus 593 engine. 3D sound cone technology has been used, you can hear the afterburners blasting from the behind Concorde. This will make your concorde come to life again. It can be used in Concorde X, Uber realism with the spool up, start up, takeoff roars and afterburners from behind. Interior sounds have been carefully recorded and old videos have been used for realism. The Olympus engines are two spool engines, 38,050 lbs of thrust was delivered to push the Concord
-
- concorde x
- sounds
-
(and 3 more)
Tagged with:
-
I've changed my email address, i sent a ticket AW2CHT75423 with out this changed I can't re-download or get my activation code and order number. please help thanks.
-
Hi everyone i just bought the concorde X yesterday for P3D 3.2 but i'm beggining to be really dispointed by this addon right now , since the install each time i load concorde , the sim OOM , every single time i try , i OOM I have a powerfull system who can run pmdg 777 and a lot of others addons with everything maxxed out without any problem at all , got no OOMs for months and now it's every time i load concorde. even when i've tried to reduce the graphics of the sim to the lowest specs possible..... What's wrong ??? i was expecting something really better regarding the price of
- 5 replies
-
- concorde x
- prepar3d
-
(and 2 more)
Tagged with:
-
Hey guys, Prepard3 V3.3 has been released. I tried my concorde there but it dindt worked well. I now its something with registers that dont match. so my question is wil there be a new update for CONCORDE X. Best regards, Salim
-
Hey everyone, I just want to write this thanking everyone that helped me out from my very first post - I've read the tutorial and Concorde X is just an absolute joy to fly (However I still rely on the VFE for most of the fuel transfers... Haha). Kudos to everyone who helped me and the Concorde X Team - You're the ones who helped me even get in the air - Climbing to 60,000 feet even in simulation is truly a thrilling experience once you do it right!
- 1 reply
-
- 4
-
-
- concorde
- concorde x
-
(and 2 more)
Tagged with: