March 30, 20233 yr My home cockpit MIP & Glare build started today with receiving a nice package from Skalarki. Package content: - A320-232 MIP CS side - HOMELine - Speaker Panel CS - HOMELine - EFIS Controls CS - PROLine T on ND Panel The quality as always top-notch! More stuff will come later. Now back to CAD for further design of the structure . I will update later on progress.
March 31, 20233 yr Author 9 hours ago, Vincent Twisker said: Will you build the CS side only? Hi Vincent. Yes. I am planning to build CS only for now.
June 17, 20233 yr Author Some more stuff arrived recently: - HomeLine Glare Wing CS - Proline A320 Chrono - Homeline Tripple Gauge - Proline Isis Panel And design of MIP/Glare is going pretty well. A few more details and I can start ordering wood frame parts and 3D print all other Foot rests and sliding table will move And this how it looks with previous build modules
November 24, 20232 yr 3 hours ago, Gregory Verba said: Foot rest and sliding table are ready for installation: Is this your own work Gregory?
November 24, 20232 yr 3 hours ago, Gregory Verba said: Foot rest and sliding table are ready for installation: That looks amazing. Well done once again!
November 25, 20232 yr Author 11 hours ago, Norman Blackburn said: Is this your own work Gregory? Yes Norman 3D and mechanical design, 3D printing, painting and assembly. 11 hours ago, Vincent Twisker said: That looks amazing. Well done once again! Thanks a lot ! 10 hours ago, Joe Park said: Fantastic work @Gregory Verba Thanks a lot !
November 25, 20232 yr 1 hour ago, Gregory Verba said: Yes Norman 3D and mechanical design, 3D printing, painting and assembly. That is absolutely amazing @Gregory Verba! Do you know if it would fit a Skalarki setup and if so is it something you would consider making others?
November 25, 20232 yr Author 3 hours ago, Norman Blackburn said: That is absolutely amazing @Gregory Verba! Do you know if it would fit a Skalarki setup and if so is it something you would consider making others? Hi Norman, I am not sure it will fit Skalarki mip structure (probably not). Although I use many Skalarki components, I designed it to fit my mip structure.
November 25, 20232 yr 51 minutes ago, Gregory Verba said: Completed That is master craftsmanship, absolutely beautifull. Enjoy captain!
November 26, 20232 yr Author 12 hours ago, Norman Blackburn said: I am very impressed by yours skills here @Gregory Verba! Thanks a lot dear Norman!
December 22, 20241 yr Hello Gregory! First of all congratulations on the cockpit. That's what I want to do. Second: Can you share the file so I can have the same structure produced? Third: The screens used were 1 of 17 and 1 of 19? I would like to do the same. Cheers from Portugal
February 3, 20251 yr Fantastic work, I am working on my sim using the Skalarki MIP gauges. What screens did you use for flight displays and ECAM?
March 2, 20251 yr Hi @Gregory Verba i found a dxf online that has the full MIP both sides, but because some parts are cloned it’s really hard to split it out for captains side only. Would you be kind enough to send over the CAD files you used for your build so I can get the parts laser cut? I have suitable DXF’s for the pedestal and console, I just need the MIP. Thanks! Rich
April 26, 20251 yr hi gregory..can i ask you what material and thickness you used for the glareshield and top??i am getting a full mip laser cut in 12mm mdf..but that thickness is way to much for the glare and top..many thanks in advance..steve
May 6, 20251 yr Very nice, i have two questions, which software are you using to run your flightsim, is its MSF2020 0R 24, OR P3D. if you using MSFS how did you separated the exterior view and moved it to another screen.Which keys did you used? Thanks.
May 9, 20251 yr On 3/2/2025 at 6:07 PM, Rich Williams richieflyus said: Hi @Gregory Verba i found a dxf online that has the full MIP both sides, but because some parts are cloned it’s really hard to split it out for captains side only. Would you be kind enough to send over the CAD files you used for your build so I can get the parts laser cut? I have suitable DXF’s for the pedestal and console, I just need the MIP. Thanks! Rich Rich..if you have a dxf for the pedestal..you don’t mind sending it to me do you..I am trying to locate one with no success..I have the mip..but like yours it’s the full one or I would have shared it if it was captain side..many thanks in advance Steve
May 16, 20251 yr On 5/9/2025 at 8:54 AM, stephen speak said: Rich..if you have a dxf for the pedestal..you don’t mind sending it to me do you..I am trying to locate one with no success..I have the mip..but like yours it’s the full one or I would have shared it if it was captain side..many thanks in advance Steve Try here - tons of resources https://www.facebook.com/groups/817102292436795/files/files
May 16, 20251 yr 2 minutes ago, Rich Williams richieflyus said: Try here - tons of resources https://www.facebook.com/groups/817102292436795/files/files I am a member of that group and haven’t come across one on there..I have all the other stuff on dxf
July 23, 20251 yr Hi, this looks amazing. I have had the Skalarki mip delivered and looking for a frame to mount it to. Are you able to share your file so I can have this cut? Also willing to pay/ donate for your hard work.
July 26, 20251 yr On 7/23/2025 at 10:45 PM, MurrayLuker said: Hi, this looks amazing. I have had the Skalarki mip delivered and looking for a frame to mount it to. Are you able to share your file so I can have this cut? Also willing to pay/ donate for your hard work. I could really do with a copy of this too please
July 26, 20251 yr Thanks, I have that one but it’s the full MIP not captains side only. I have been trying to reduce that dxf to just captains side only but it’s not as easy as it looked!
July 26, 20251 yr 6 hours ago, Rich Williams richieflyus said: Thanks, I have that one but it’s the full MIP not captains side only. I have been trying to reduce that dxf to just captains side only but it’s not as easy as it looked! i think sim guy is on discord..see if you can find him on there and see if he will design one..he will probably charge hor an ad hoc design though
July 26, 20251 yr Ah ok thanks. I don’t mind paying for an adjustment to the existing design. Getting the MIP and pedestal cut, quote I had was about £250 inc VAT for cutting and materials.
July 26, 20251 yr 11 minutes ago, Rich Williams richieflyus said: Ah ok thanks. I don’t mind paying for an adjustment to the existing design. Getting the MIP and pedestal cut, quote I had was about £250 inc VAT for cutting and materials. I got a quote for £350 for the whole lot full size mip.. minus the pedestal as that’s not been done as a dxf file..that being said I am in the middle of ordering a pedestal from skalarki
July 26, 20251 yr 27 minutes ago, stephen speak said: I got a quote for £350 for the whole lot full size mip.. minus the pedestal as that’s not been done as a dxf file..that being said I am in the middle of ordering a pedestal from skalarki Nice! I’ll see if I can contact flight sim guy and get a quote for a captains side drawing…
July 26, 20251 yr 1 hour ago, Rich Williams richieflyus said: Nice! I’ll see if I can contact flight sim guy and get a quote for a captains side drawing… It’s just simguy
July 29, 20251 yr There is no discord link to simguy..he has a link on patreon here…https://www.patreon.com/320diy
July 29, 20251 yr 1 hour ago, stephen speak said: There is no discord link to simguy..he has a link on patreon here…https://www.patreon.com/320diy
August 14, 20251 yr I sent the file to my local cutters and just told them which panels to cut and which to ignore. They charged me £100 and that included the moisture resistant MDF too. It doesnt quite fit the Skalarki MIP but I am getting there adding bits here and there to make it fit. I am currently in the process of building the pedestal, Im very tempted to buy Skalarki's frame so its just plug and play but just trying to save a few ££ here and there as so far I am a few thousand deep already.
August 14, 20251 yr 48 minutes ago, MurrayLuker said: I sent the file to my local cutters and just told them which panels to cut and which to ignore. They charged me £100 and that included the moisture resistant MDF too. It doesnt quite fit the Skalarki MIP but I am getting there adding bits here and there to make it fit. I am currently in the process of building the pedestal, Im very tempted to buy Skalarki's frame so its just plug and play but just trying to save a few ££ here and there as so far I am a few thousand deep already. I have a full skalarki pedestal on order..that’s going to be coupled with the sim guy mip frame
November 21, 2025Nov 21 On 8/14/2025 at 9:53 AM, MurrayLuker said: I sent the file to my local cutters and just told them which panels to cut and which to ignore. They charged me £100 and that included the moisture resistant MDF too. It doesnt quite fit the Skalarki MIP but I am getting there adding bits here and there to make it fit. I am currently in the process of building the pedestal, Im very tempted to buy Skalarki's frame so its just plug and play but just trying to save a few ££ here and there as so far I am a few thousand deep already. Wow for the whole Captain's side? I was quoted £250...
November 21, 2025Nov 21 20 minutes ago, Rich Williams richieflyus said: Wow for the whole Captain's side? I was quoted £250... £400 for captain and first officer
February 1Feb 1 On 8/5/2023 at 11:35 AM, Gregory Verba said: Structure is ready. Lets populate it with some panels and electronics On 8/5/2023 at 11:35 AM, Gregory Verba said: Structure is ready. Lets populate it with some panels and electronics Hi, sieht super aus! Gibt es hierzu evtl. ein DXF / STEP?
February 2Feb 2 19 hours ago, Oliver Rakowski said: Hi, sieht super aus! Gibt es hierzu evtl. ein DXF / STEP? Same here
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.