Hi Lefteris

Problem with the Go Flight EFIS , when selecting distance radial equal to 100 the Efis says 100 but flight Sim reverts back to 10 miles, works great either side of 100 ?.

Thanks

Duncan

Duncan-

not sure what that means... can you elaborate?

Hi Lefteris

On the Go flight Efis panel when selecting distance radius to 160 and not 100 hundred miles as I stated earlier, the panel indicates 160 but Microsoft screen panel indicates only 10 miles.

Sorry for the confusion.

Thanks

Duncan

I just did another test on my hardware here, and things look normal.

In our FSLabs GoFlight driver interface dialog window, can you check "Enable Debug Window", try the EFIS ND Range knob and copy/paste the output into a text file, zip and send it to me please?

Thanks,

Run the check as instructed and yes Go Flight was not registering a record for 160 and reverts back to 10 miles.

Thanks again

Duncan

Yes, I saw the debug log file, which indicates that the hardware is indeed sending a wrong knob value to our driver. Not much we can do about that, you understand ;-).

I'd research a loose knob and/or discuss with the hardware manufacturer to see why the hardware is sending wrong values...

Yes, I saw the debug log file, which indicates that the hardware is indeed sending a wrong knob value to our driver. Not much we can do about that, you understand ;-).

I'd research a loose knob and/or discuss with the hardware manufacturer to see why the hardware is sending wrong values...