September 14, 20205 yr Now that for example the Thrustmaster TCAs have a selector switch to assign either pilot or co-pilot configuration, would it be difficult for the development team to introduce the dual input simulation with both sidesticks connected in a future update? It would be awesome if the take over function of the AP disconnect button and the priority system would become functional in FSLabs.
January 20, 20215 yr On 9/14/2020 at 7:35 AM, Vincent Twisker said: Now that for example the Thrustmaster TCAs have a selector switch to assign either pilot or co-pilot configuration, would it be difficult for the development team to introduce the dual input simulation with both sidesticks connected in a future update? It would be awesome if the take over function of the AP disconnect button and the priority system would become functional in FSLabs. Vincent where did you get your rubber boot from for the TCA?
January 20, 20215 yr 2 hours ago, James Littler said: Vincent where did you get your rubber boot from for the TCA? Probably one of those: https://www.fsc.it/Product.aspx?lang=ENG&ID=36a94347-6fa2-412f-8b47-1898286b6d1d
January 20, 20215 yr Ouch... for a piece of rubber!! Anyone know something similar? I'd be better off getting an old Volkswagen Golf MKII gear gaitor and re-colouring
January 21, 20215 yr Author 17 hours ago, James Littler said: Vincent where did you get your rubber boot from for the TCA? Hi James...I ordered these on AliExpress and did some modifications. @Luis...I take that as a compliment haha
January 21, 20215 yr 1 hour ago, Vincent Twisker said: Hi James...I ordered these on AliExpress and did some modifications. @Luis...I take that as a compliment haha That's more like it, thanks for the tip Vincent
January 23, 20215 yr On 9/14/2020 at 9:35 AM, Vincent Twisker said: Now that for example the Thrustmaster TCAs have a selector switch to assign either pilot or co-pilot configuration, would it be difficult for the development team to introduce the dual input simulation with both sidesticks connected in a future update? It would be awesome if the take over function of the AP disconnect button and the priority system would become functional in FSLabs. That's in for next version update.
April 1, 20215 yr Author And another thank you FSLabs! The latest update has made a huge step forward in this regard as well. The only thing missing after some quick initial testing is that I did not get the aural "Dual input" warning when making simultaneous inputs. But a big thanks for this implementation!
April 1, 20215 yr Author 46 minutes ago, Lefteris Kalamaras said: It's there. Strange, because I do get the "priority left/right" aural when holding the AP disconnect buttons, but not the aural "dual input" when applying simultaneous inputs. I will check again tomorrow.
April 2, 20215 yr Ok I see. Sorry didn't bother reading the manual as I'm a long time user, didn't thought this would have been an option.
April 2, 20215 yr Just now, Frederic Gentil said: Ok I see. Sorry didn't bother reading the manual as I'm a long time user, didn't thought this would have been an option. It's definitely a pin option and I just discovered it's not being saved after set, so that it can remain selected for your next load. Sorry about that - it should be fixed for the next update (it'll be saved in the particular livery configuration, however).
April 2, 20215 yr 1 hour ago, Lefteris Kalamaras said: It's definitely a pin option Ok, learned something today. Even though I've been flying on the airbus family for now more than 4 years, I never knew that this was actually an option. I always thought it was standard on each Airbus. All the airbus I flew so far are all equipped with the "Dual Input" Aural warning. Got this information from the following link Dual Input
April 10, 20215 yr hello, how can I do a dual input into Fslabs? my Joystick it connected either to left or right, depents on setup in the FMS... how can I set up a second Joystick to the others side sidestick?
April 10, 20215 yr 12 minutes ago, Marc Mayer said: hello, how can I do a dual input into Fslabs? my Joystick it connected either to left or right, depents on setup in the FMS... how can I set up a second Joystick to the others side sidestick? Well if you own the version for p3d v4 or v5 then install the latest version. That will allow two units to be connected.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.