Jump to content

Concorde-X V1.40 Now Available For Fsx and P3D v3.


Lefteris Kalamaras

Recommended Posts

Kyprianos Biris
3 hours ago, Carlos Meneses said:

@Lefteris Kalamaras Im a FSX user, that nstructions you gave me , took me to here:

[RenderAsync]
ADI_CP=1
ADI_FO=1

But as you can see , there isnt the ALL entry, so Ive added and deleted the two others ADI CP  and ADI FO, Ill see how it works

Just set it to

[RenderAsync]
ALL=0

and let us know.

Link to comment
  • 2 weeks later...
Vimal Anandharaman

affirm, left all the entries at =0, I understand that ALL=0 overwrites the first 2 entries?

Actually, I havent really tried a flight with ALL=1. Maybe the fix was unnecessary for my system. Ill do more testing. 

Link to comment
  • 1 month later...
  • 2 weeks later...
James Burke

I'm now experiencing this issue as well, as others have mentioned, after between 30-90 minutes into a flight. The INS's and sometimes other gauges all stop working, usually not all at the same time but once one fails a number of other gauges will invariably begin to fail. Usually the INS but I have seen others fail.

I've also once seen the gauges above the ground power switch go black until the ground power was turned on, at which point they began operating normally.

 

I'll give this fix a try to fix the INS's but it sounds like there may be something strange and more difficult at the root of the problem.

Link to comment
  • 3 weeks later...
Ray Proudfoot

I flew EGLL-KJFK yesterday and had none of these problems. I load P3D with the Cub and then reposition to 412 at EGLL. I then load Concorde from the Vehicle menu. It starts C&D. I then go through the startup procedure as described in the tutorial.

Those of you having problems should describe how you start up. Maybe avoid loading a previously saved flight and loading a previously saved panel state. Oh, and one final thing. I do not have Spotlights installed.

Link to comment
Ray Proudfoot

I do have a strange problem that manifests itself every so often. I have assigned SHIFT+CTR+N to the Brake panel. Sometimes it works but sometimes it doesn’t. I’m pretty experienced with both Concorde and computers in general but this has me baffled. The command shows in the relevant ini file so there’s absolutely no reason why it shouldn’t always work.

Another strange thing yesterday. I went into FSL Options and tried to deselect the option for the VFE to handle fuel mgmt. It just wouldn’t switch off. A reboot and a reload and things work again. Bizarre! :unsure:

Link to comment
  • Lefteris Kalamaras unpinned this topic
×
×
  • Create New...