GPU connection with GSX

[Stefan Nirschl 11]

Dear folks,

thank you for the update this week!

It seems, when i use the default load state with GPU already connected, GSX´s GPU still isn`t already connected as well.

Are there any possiblities to fix that in future updates?

All the best,

Stefan Nirschl

[Stu Antonio 2717]

Just now, Stefan Nirschl said:

Dear folks,

thank you for the update this week!

It seems, when i use the default load state with GPU already connected, GSX´s GPU still isn`t already connected as well.

Are there any possiblities to fix that in future updates?

All the best,

Stefan Nirschl

I guess it will never be possible to have a scenario loading with GSX stuff already "connected" or doing it's thing. Otherwise I would love to have jetwas/stairs already connected when I load. But I think it's the nature of the thing that GSX always starts (in a base configuration) after the plane loads.

[Andrew Wilson 7334]

That would be something you’d need to request on the GSX forum.

[Stefan Nirschl 11]

@Stu: This makes sense

@Andrew: Just to be sure. When i`m at the gate with jetways and push "mech" the following happens:

Only gateways are moving to the plane but no GSX GPU, right?

When I´m at random gate (with no jetways) and push "mech", stairs AND GSX GPU arrives, right?

 

Thanks to you both for your reponses before!

 

Best,

Stefan

[António Abreu 87]

Hey,

Thank you for the quick response on P3DV5 update.

when loaded at a stand with jetway (MkStudios LPPT Stand 125) and press the MECH HORN the jetway does connect but no ground/external power.

Does this mean that when at a stand with jetway we need to manually call the GPU or is there any other mean to automatically get extermal power green on the overhead?

Thank you

[Andrew Wilson 7334]

35 minutes ago, António Abreu said:

when loaded at a stand with jetway (MkStudios LPPT Stand 125) and press the MECH HORN the jetway does connect but no ground/external power.

Are you on the latest GSX Build? Please try and run Live Update.

@António Abreu I found the issue - we're working on a fix.

[António Abreu 87]

56 minutes ago, Andrew Wilson said:

Are you on the latest GSX Build? Please try and run Live Update.

Done, no effect, still no ground power. Should it connect before or after the jetway?

[António Abreu 87]

9 hours ago, Andrew Wilson said:

Are you on the latest GSX Build? Please try and run Live Update.

@António Abreu I found the issue - we're working on a fix.

Thank you for the feedback.