Jump to content
Camille MOUCHEL

questions regarding p3DV5 performance

Recommended Posts

Camille MOUCHEL

Hi guys,

 

I'm currently on V4.5 but with the fslabs i'm getting between 18-22 FPS during take off roll and landing and 22-26 FPS if lucky during cruise (1440p).

i only fly on scenery like Mk Sudio, just sim, flytampa.....

the probelm is my ancient GPU (1080Ti) is only averaging like 30% max, maybe that's because I have a dionosaure 4790k@4.6 Ghz.

Hearing that V5 gives significant FPS boost, I was wondering if you guys woud know if V5 will give me 25-30 FPS stable in most situtation. i'm not asking for 40-60 FPS like some people get witht he PMDG or maddog; but 25-30 FPS and i'll be very happy

 

my settings

 

image.thumb.png.cbe71c8e63228f2d7335c3eaef6ebec8.png

image.thumb.png.a721cf70cb55eb46b2d6f44fdddd7f7b.png

 

image.thumb.png.f283257cf0b20d3d7e23b37042893513.png

Share this post


Link to post
Louis Vallance

It's impossible to give a concrete answer until we get our hands on the FSL v5 update. With PMDG's updated  QOTSII + ASN + ORBX + 3rd party airports, I get an improvement in framerate of about 100% over v4.5. That's with the i9-9900K and RTX 2080.

  • Like 1
  • Thanks 1

Share this post


Link to post
Camille MOUCHEL
6 minutes ago, Louis Vallance said:

It's impossible to give a concrete answer until we get our hands on the FSL v5 update. With PMDG's updated  QOTSII + ASN + ORBX + 3rd party airports, I get an improvement in framerate of about 100% over v4.5. That's with the i9-9900K and RTX 2080.

thank you for the input

  • Thanks 1

Share this post


Link to post
Angel Vallejo Duarri
6 hours ago, Louis Vallance said:

It's impossible to give a concrete answer until we get our hands on the FSL v5 update. With PMDG's updated  QOTSII + ASN + ORBX + 3rd party airports, I get an improvement in framerate of about 100% over v4.5. That's with the i9-9900K and RTX 2080.

And what's your boost in VRAM usage?

Stopped at Flytampa KLAS I get to more than 5 gb of VRAM usage, it's crazy and unusable (using default aircraft).

Share this post


Link to post
markjavornik
13 hours ago, Louis Vallance said:

It's impossible to give a concrete answer until we get our hands on the FSL v5 update. With PMDG's updated  QOTSII + ASN + ORBX + 3rd party airports, I get an improvement in framerate of about 100% over v4.5. That's with the i9-9900K and RTX 2080.

Is that with Truesky enabled?  I find that I only see a performance increase when Truesky is enabled, but with it off my performance is very similar to v4

Share this post


Link to post
Louis Vallance
27 minutes ago, markjavornik said:

Is that with Truesky enabled?  I find that I only see a performance increase when Truesky is enabled, but with it off my performance is very similar to v4

Hi Mark,

With TreuSky enabled, my framerate at KLAS actually jumps slightly. However, this could be due to the fact that I reduced the cloud resolution to medium in Enhanced Atmospherics to prevent OOM. KLAS is an especially tough area (KLAS, KJFK and EGLL are where framerates go to die in my sim). Getting ~30-35 stable at this location is something I could never achieve in v4.

Cheers,

Louis

qotsii_klas_ts1.png

qotsii_klas_ts0.png

Share this post


Link to post
Louis Vallance
7 hours ago, Angel Vallejo Duarri said:

And what's your boost in VRAM usage?

Stopped at Flytampa KLAS I get to more than 5 gb of VRAM usage, it's crazy and unusable (using default aircraft).

Hi Angel,

VRAM usage at KLAS with medium-high graphics settings is very high. I have to reduce cloud resolution or disable enhanced atmospherics in order to stave off OOMs. Just like you, I can easily pass 5GB of VRAM usage.

If I know I'm flying into a "danger" airport, I have to reduce my resolutions a little bit beforehand. I learnt this the hard way when my sim crashed 10nm from KBOS after a 6-hour journey over the atlantic...

Cheers,

Louis

Share this post


Link to post
Ross McDonagh
On 5/19/2020 at 11:37 AM, Louis Vallance said:

 

It's impossible to give a concrete answer until we get our hands on the FSL v5 update. With PMDG's updated  QOTSII + ASN + ORBX + 3rd party airports, I get an improvement in framerate of about 100% over v4.5. That's with the i9-9900K and RTX 2080.

 

This is very encouraging news for my new PC which will be based on an i9 10900K and an RTX 2080 Super-but the biggest thing I’m waiting for is the FSL bus to get released for V5.    

Share this post


Link to post
Wilhelm Zwirchmayr

hi, i also had a 1080 ti

with WQHD + night / dynamic light, pushes your graphics card to the limit, HD resolution is no problem

additional:
FXAA Off
2 x SSAA requires a lot of power, one level below
I would limit FPS, with unlimited your system always runs on 100%
my FPS are blocked on 30

dynamic 3d autogen ..... - switch off, all addon manufacturers recommend, only brings problems

cfg there are also a couple of options

[MAIN]
FIBER_FRAME_TIME_FRACTION = 0.01

[PANELS]
Panel_Max_Update_Per_Frame = 1

[TERRAIN]
SWAP_WAIT_TIMEOUT = 1
UseGlobalTerrainView = True
TEXTURE_SIZE_EXP = 9 with 10 higher memory requirements

here are a few options, read and try them out
https://www.avsim.com/forums/topic/545920-p3d-v44-and-settings-and-video-samples-from-beta/page/9/

  • Like 1

Share this post


Link to post
Wilhelm Zwirchmayr

for HD yes.
It flew as I bought a wqhd monitor and had only 12 fps at dynamic light at loww airport at night.
I also had the 4790 cpu, which I then exchanged for the 8800k. I had about 15-20 fps more with the same setting, plane, weather etc.
between 8800k and 9900k the fps increases are not that big.
amd 12 core with some settings you have about the same performance.
16 core bring disadvantages

Share this post


Link to post
RadoR
On 5/19/2020 at 4:13 PM, Camille MOUCHEL said:

Hi guys,

 

I'm currently on V4.5 but with the fslabs i'm getting between 18-22 FPS during take off roll and landing and 22-26 FPS if lucky during cruise (1440p).

i only fly on scenery like Mk Sudio, just sim, flytampa.....

the probelm is my ancient GPU (1080Ti) is only averaging like 30% max, maybe that's because I have a dionosaure 4790k@4.6 Ghz.

Hearing that V5 gives significant FPS boost, I was wondering if you guys woud know if V5 will give me 25-30 FPS stable in most situtation. i'm not asking for 40-60 FPS like some people get witht he PMDG or maddog; but 25-30 FPS and i'll be very happy

 

my settings

 

image.thumb.png.cbe71c8e63228f2d7335c3eaef6ebec8.png

image.thumb.png.a721cf70cb55eb46b2d6f44fdddd7f7b.png

 

image.thumb.png.f283257cf0b20d3d7e23b37042893513.png

Hi,

I’m using 4770K @4,5GHz HT off, 1080 Ti 11GB and 32GB RAM, my settings are i most sliders on Max or very high, and I don’t end up with fps lower than 20, mostly locked all the time at 30, I’m very happy and not planing to upgrade/purchase new PC until end of year or next. P3Dv5 RTM version run even better than HF1, I don’t use Truesky yet (but it doesn’t affect my performance). I use ORBX, Flytampa and other demanding sceneries, PMDG,Maddog,Qw787, ASP3D withs ASCA.

 

Rado

Share this post


Link to post
Camille MOUCHEL
5 hours ago, RadoR said:

Hi,

I’m using 4770K @4,5GHz HT off, 1080 Ti 11GB and 32GB RAM, my settings are i most sliders on Max or very high, and I don’t end up with fps lower than 20, mostly locked all the time at 30, I’m very happy and not planing to upgrade/purchase new PC until end of year or next. P3Dv5 RTM version run even better than HF1, I don’t use Truesky yet (but it doesn’t affect my performance). I use ORBX, Flytampa and other demanding sceneries, PMDG,Maddog,Qw787, ASP3D withs ASCA.

 

Rado

you get llower than 20 FPS even with fslabs A32X on V4?

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...