Scott Wilson 95 Posted April 14, 2019 Report Share Posted April 14, 2019 RobA just finished his tests on 4.5 vs 4.4 Link to post
Alejandro mirania 16 Posted April 14, 2019 Report Share Posted April 14, 2019 Thanks for the release, it might have been a hard coding !!! best regards! Alex Link to post
Paolo Basta 290 Posted April 14, 2019 Report Share Posted April 14, 2019 So is it worth updating to P3d V4.5 , or stay with V4.4 for the FSL thanks. 1 Link to post
Mark Visch 64 Posted April 14, 2019 Report Share Posted April 14, 2019 I reverted to 4.4 client (content 4.5) and got more performance. I was getting horrible performance even at cruise, reverting solved it for me. 1 Link to post
Paolo Basta 290 Posted April 14, 2019 Report Share Posted April 14, 2019 I reverted to 4.4 client (content 4.5) and got more performance. I was getting horrible performance even at cruise, reverting solved it for me. Wow, even if i have a 2080TI and a I9 9900K Link to post
Martin Mueller 8 Posted April 15, 2019 Report Share Posted April 15, 2019 I will wait until LM give some reactions to the problems. Link to post
Stu Antonio 3467 Posted April 15, 2019 Report Share Posted April 15, 2019 Just reverted back as well. For the second time now Link to post
James Goggi 213 Posted April 15, 2019 Report Share Posted April 15, 2019 Hi, just out of curiosity, since I don't remember: will the fuselage PBR textures be one of the next priorities? Thanks. Link to post
Ramon De Valencia 134 Posted April 15, 2019 Report Share Posted April 15, 2019 51 minutes ago, James Goggi said: Hi, just out of curiosity, since I don't remember: will the fuselage PBR textures be one of the next priorities? Thanks. Here we go again. 2 Link to post
NilsUnger 1002 Posted April 15, 2019 Report Share Posted April 15, 2019 It's a valid question. I would think after the storm of this release has calmed they work towards the release of the A321. And I would be surprised if this release is without pbr textures. But I am no insider... Link to post
Ramon De Valencia 134 Posted April 15, 2019 Report Share Posted April 15, 2019 9 minutes ago, NilsUnger said: It's a valid question. I would think after the storm of this release has calmed they work towards the release of the A321. And I would be surprised if this release is without pbr textures. But I am no insider... we all are in the eye of the storm right now, it is the right time to enjoy a much awaited update. Why don't we just enjoy it and then start thinking about a new update, we all know it is coming (A321 and PBR) but it shouldn't be anyones priority now, I rather have them supporting some guys with small issues. 1 Link to post
James Goggi 213 Posted April 15, 2019 Report Share Posted April 15, 2019 50 minutes ago, Ramon De Valencia said: Here we go again. Did I ask for your opinion? 1 Link to post
Ramon De Valencia 134 Posted April 15, 2019 Report Share Posted April 15, 2019 26 minutes ago, James Goggi said: Did I ask for your opinion? you didn't but I going to give it to you anyway. You visited this forum everyday during the last 5 months complaining that didn't have your update. And now that you finally has it, you come back asking for the next update. I now believe what other people was thinking about your behavior is completely accurate. 14 8 Link to post
Renaud Mazoué 8 Posted April 15, 2019 Report Share Posted April 15, 2019 Hi All Installing the new version a320 and a319 for use them with p3dv4.5, the installation stop it indicating me that my spotlight version is outdated (currently i have v2.0.0.10 version). Where can i update this new version please ? Thanks very much. Link to post
Renaud Mazoué 8 Posted April 15, 2019 Report Share Posted April 15, 2019 Don't answer me… i found… sorry 1 Link to post
Konstantinos Papageorgiou 8 Posted April 15, 2019 Report Share Posted April 15, 2019 I found the 4.5 quite troubling. I also reverted back (only the client to 4.5) and performance got back. Lovely update, thank u! Link to post
Ulas Ates 16 Posted April 15, 2019 Report Share Posted April 15, 2019 I have to say the performance in 4.5 seems to be for the worst. I might have to revert the client back to 4.4 Link to post
Norman Blackburn 3590 Posted April 16, 2019 Report Share Posted April 16, 2019 22 hours ago, James Goggi said: Did I ask for your opinion? @James Goggi really? If you think thats the way to utilise the forums you need to reconsider very quickly, 14 Link to post
brendon powys 17 Posted April 16, 2019 Report Share Posted April 16, 2019 Just did my 1st flight with 4.5 and having low fps plus stutters i dont have orbx regions installed. Rolling back yo 4.4 for now Link to post
duartevieira 219 Posted April 16, 2019 Report Share Posted April 16, 2019 1 hour ago, Norman Blackburn said: @James Goggi really? If you think thats the way to utilise the forums you need to reconsider very quickly, What he’s asking is for a ban for while now it’s just grief and I am shure it’s not just me that thinks that way people like him puts me and other away from this forums and that is a shame really 10 Link to post
Robert Sutherland 849 Posted April 16, 2019 Report Share Posted April 16, 2019 James is the person I've muted on here and on the PMDG forum. I've also blocked him on Facebook. The incessant need for an update, literally days after the newest one was released, is tiresome and annoying. He did the same on the PMDG forum days after their PBR update, demanding that their rain effects needed improving. His argument is that he just wants the product to be the best it can be. But the way it comes across is that he's entitled and demanding. 13 Link to post
Alhard Horstmann 4 Posted April 16, 2019 Report Share Posted April 16, 2019 On 4/12/2019 at 4:30 PM, Chris Kreuzbichler said: I do select it in the MCDU, the star then distinguishes and reappears but my printer does nothing. Did you get the terow pos-58 (5890k) one? Hi, where do I find the printer function, in which manual? Link to post
Koen Meier 1451 Posted April 16, 2019 Report Share Posted April 16, 2019 5 minutes ago, Alhard Horstmann said: Hi, where do I find the printer function, in which manual? Data key on the mcdu then right lsk printer Link to post
Alhard Horstmann 4 Posted April 16, 2019 Report Share Posted April 16, 2019 Thanks, there are print selections, but where is the printer assignment? I found it the other day, but now I lost. BTW, you see this function not when you click on print, but when you click on next page (2 pages) then you can configure what to print. With me, still no printing is established. WIn7 PRO, P3D V4.4 and FSL update 347 Link to post
Chris Kreuzbichler 137 Posted April 16, 2019 Report Share Posted April 16, 2019 1 minute ago, Alhard Horstmann said: Thanks, there are print selections, but where is the printer assignment? I found it the other day, but now I lost. BTW, you see this function not when you click on print, but when you click on next page (2 pages) then you can configure what to print. With me, still no printing is established. WIn7 PRO, P3D V4.4 and FSL update 347 Then it states select printer. You need to click on your printer. Mine has the name POS-58. That should be about it Link to post
Alhard Horstmann 4 Posted April 16, 2019 Report Share Posted April 16, 2019 Thanks Chris, I will check and report. Did you find a manual or a description of this function? Link to post
Koen Meier 1451 Posted April 16, 2019 Report Share Posted April 16, 2019 Just now, Alhard Horstmann said: Thanks Chris, I will check and report. Did you find a manual or a description of this function? introduction guide on page 15. Link to post
Chris Kreuzbichler 137 Posted April 16, 2019 Report Share Posted April 16, 2019 2 minutes ago, Alhard Horstmann said: Thanks Chris, I will check and report. Did you find a manual or a description of this function? I have to admit I didn't but I might hav ebeen sloppy trying to find it. If you set up your printer correctly and have inserted the paper it should print stuff on then everything should look correctly upon clicking PRINT on the MCDU. EDIT: Yeah, seems I was sloppy. Koen just mentioned where it is But I am a man and men don't read manuals, they do and hope it works Link to post
Alhard Horstmann 4 Posted April 16, 2019 Report Share Posted April 16, 2019 Thanks, now I found the description as Koen said. The new guides of the Update 347 landed here: "C:\Program Files\FlightSimLabs\A320X\P3Dv4\Documentation" where I didn't look for. My Problem still is the assignment. See picture print1, I click on LSK 5R AND NOTHING HAPPENS, not until I click on arrow key "next page" then I get picture print2. But NO ASSIGNEMENT. The Bus is warm and running. Link to post
James Goggi 213 Posted April 16, 2019 Report Share Posted April 16, 2019 10 hours ago, Norman Blackburn said: @James Goggi really? If you think thats the way to utilise the forums you need to reconsider very quickly, Norman, in all sincerity I did not expect such a reply from you… I just politely asked a question, now I start being a bit p***ed off by the people who, as soon as I write something (and above all when I ask the developers), chime in without having anything to do with what I write and give a stupid reply of the kind "here we go again"... We go where??? Don't you think that the "reconsider very quickly" should apply to them? 3 Link to post
Jamie Whiting 102 Posted April 17, 2019 Report Share Posted April 17, 2019 If I may.... What Norman was saying is that this is a Forum, and without intending to patronise, that means that it is an open speaking space (derived from the Roman concept); If you posit an Idea or request then by definition you are opening your contribution up to the opinions of others whether you agree or not. It is not a private message service, you are essentially addressing a room of people. Posting and then complaining when someone disagrees is somewhat missing the point. So long as the person disagreeing is not grossly offensive or making a highly personal attack then it is perfectly acceptable. As you are entitled to offer your thoughts, so are others whether you agree with them or not. You cannot simply slap someone down by saying such as "Did I ask for your opinion", as I said before this is a Forum. If you don't think that person's obervation is valid you could simply ignore it, or if it is more of a logical disagreement then perhaps discuss (not really applicable in this case). Furthermore, one should consider that unlike when speaking face to face it is not possible to judge how the poster intended the words to be heard, so one must make allowances. Something intended to be quite innocuous could be construed as being agressive all too easily, and also written English can be treacherous, especially to non native speakers. Anyway, that is my two penneth, I don't intend to add any more. 15 Link to post
Scott Wilson 95 Posted April 17, 2019 Report Share Posted April 17, 2019 All winging aside, good news, looks like LM have found the 4.5 issue and will have a hotfix out soon in 2092. Rob locked the thread so there wont be hourly pinging of requests as to the status of cooking. I had a surprise last night as my house shook and I wondered what on earth it was, an A380 coming into Glasgow. Runway closure in Dubai has meant they are running 1 380 instead of 2 777LR's. Trivia, Glasgow has the only 3 jetway gate in Scotland, finished just as airbus ditch the 380, brilliant . Need to mod my UTL db. Happy Easter everyone, a time of not getting on each others nerves, as my wife reminded me last night in a passive agressive manner. 2 2 Link to post
Ulas Ates 16 Posted April 17, 2019 Report Share Posted April 17, 2019 Not again BA not again I follow captain_dave in IG. He was the captain of that flight to Dubai. I recommend a follow, he is pretty good with his posts. I have reinstalled the client for 4.4 but kept the content at 4.5. At least 10fps gained. But 4.5 although at lower frame rate seemed somewhat smoother. Happy Easter 1 Link to post
Scott Wilson 95 Posted April 17, 2019 Report Share Posted April 17, 2019 To Fly. To S..........omewhere ! 1 Link to post
Dave Woycek 153 Posted April 18, 2019 Report Share Posted April 18, 2019 Been flying the new A320 since release. Great stuff. Good performance. Stable. Happy simmer here. Some fine work on the standby intruments, btw, especially on the lighting. 1 Link to post
Chirag Geiantilal 74 Posted April 20, 2019 Report Share Posted April 20, 2019 This update will be released for FSX? Link to post
Norman Blackburn 3590 Posted April 22, 2019 Report Share Posted April 22, 2019 On 4/20/2019 at 4:35 PM, Martin3422 said: Great job, this latest A320-x update by FS Labs! Thanks for the kind words Martin. Please change your forum name to be your real name. Thanks! Link to post
Askin Erdogandan 12 Posted April 22, 2019 Report Share Posted April 22, 2019 Ok give me break the performance are far from what ive expected from this p3d update to 4.5. What a shame Can someone give me a tip how to revert back? Is it ok when i only go back to 4.2 client and let the other components scenery and content installed, thanks you for e response. Askin Link to post
João Silva 6 Posted April 22, 2019 Report Share Posted April 22, 2019 Ok give me break the performance are far from what ive expected from this p3d update to 4.5. What a shame Can someone give me a tip how to revert back? Is it ok when i only go back to 4.2 client and let the other components scenery and content installed, thanks you for e response. Askin Hello Askin. Just install the 4.2 or 4.3 client and the compatible fslabs version.Enviado do meu SM-A510F através do Tapatalk Link to post
K. Serhan Onur 84 Posted April 22, 2019 Report Share Posted April 22, 2019 Not bad. Well, yes I agreed that v4.5 gives me fewer fps than the v4.4 (approximately 15 - 20 % fewer fps.) but not bad. I don't think to go back v4.4 and I must say that Fslabs A320 update really cool. Thanks for this update which was waiting a very long time. Sometimes, I thought that this update was just a city myth! Serhan Link to post
Askin Erdogandan 12 Posted April 23, 2019 Report Share Posted April 23, 2019 8 hours ago, João Silva said: Hello Askin. Just install the 4.2 or 4.3 client and the compatible fslabs version. Enviado do meu SM-A510F através do Tapatalk Tnx Joao. Link to post
Vasilis Nikas 0 Posted May 3, 2019 Report Share Posted May 3, 2019 Apologies in advance if this does not belong here. Are we poor FSX users going to get the same update any time in the future or has the time come to upgrade to P3D ? Link to post
Raffaele Fia$ella 16 Posted May 3, 2019 Report Share Posted May 3, 2019 16 minutes ago, Vasilis Nikas said: Apologies in advance if this does not belong here. Are we poor FSX users going to get the same update any time in the future or has the time come to upgrade to P3D ? the second one.... Link to post
Klaus Schmitzer 111 Posted May 3, 2019 Report Share Posted May 3, 2019 8 hours ago, Vasilis Nikas said: Apologies in advance if this does not belong here. Are we poor FSX users going to get the same update any time in the future or has the time come to upgrade to P3D ? I also loved my FSX, but after upgrade you will ask why you waited so long. It is an investment, but it pays off and instead of a poor FSX user you will be a proud P3D flyer 1 Link to post
Recommended Posts