Jump to content

After update 1.92 more VAS


P3da Scf

Recommended Posts

Hi,

I realized that after the update to 1.92 I need approx. 10% more VAS, so after a flight from EDDL - EGBB I'm on 3500.

With the old version I'm on 3100.

Nothing else has changed.

Any ideas?

Link to post
Dean Johnston

I did and they don't make really a difference compared to high settings in the V/C and outside...

PC:I5-6600K,GTX1060 which is capable of running other aircraft like the T7 at 40+at high for an example...So those recommendations don't really work...the aircraft needs to be more optimised

Link to post

Well guys,

checked today during daylight and relized something is going odd.

Parking with the bus at the gate in EDDL all powered up and do nothing 3.1 GB VAS in use

With the 777-300 same gate same panel state 2.3 GB in use.

I think this will be a little to much cos flying to EGBB result in a OOM.

Never had this befoe with the bus with older version.

Any ideas how to resolve this??

 

Regards

Frank

Link to post
Khoa Nguyen
2 hours ago, Artox67 said:

Parking with the bus at the gate in EDDL all powered up and do nothing 3.1 GB VAS in use

With the 777-300 same gate same panel state 2.3 GB in use.

 

Hi, I also check what you tested, At EDDL with 2430 VAS in use

Untitled.png

Link to post
Khoa Nguyen
52 minutes ago, Artox67 said:

What kind of addon's in use?

FTX Global + LC, Rex4Texture direct, Soft cloud, dx10, freemesh eu, ASN, Chaseplane exp version 

fslabs texture 2048

Link to post
×
×
  • Create New...