Search the Community
Showing results for tags 'second'.
Found 2 results
Gents, you will notice that the thrust controls (keyboard and joystick) now work a bit differently from what you're used to in FSX. The way we coded them should make a bit more sense for an Airbus, as we tried to follow the 'gates' methodology as closely as possible. Here's the logic behind them: 1) Joystick: Use the MCDU Menu -> Options page to reach the Thrust Lever Controls page In this page, you can tell the A320 sim: 1) whether your thrust controller has a single lever or two levers 2) whether you will use the stick for controlling reverse thrust or not (i.e. your stick does not go into the reverse range) 3) If you want visual cues ON to tell you if you're in a gate or not with selection "Set Gate Zones" you move to the next page, "Gate Settings" where you can set the joystick range for each gate. The example here is with a single-lever joystick, but the philosophy extends to dual controllers as well. In this page, you can select the lever you want ('BOTH' is the option if you have a single lever) and assign the proper range depending on lever position for each gate. The way I do it, I move the joystick to the full back position, click the THR POS button (LSK R1) once (scratch pad receives the current value), then move it slightly forward a bit and click LSK R1 again. The scratch pad should contain a pair of two values - for example, "-0.988/0.810". Then, press the appropriate LSK for FWD IDLE (LSK L4) to set the range for the FWD IDLE gate. I do the same the next three gates (CL, FLX MCT and TOGA) and that way, my stick is now set up to 'fall into' appropriate gates depending on the values coming to the sim from the joystick. The low/high values for each gate signify the positions within which the A320 Thrust Lever is locked inside a gate and will not 'move'. (i.e. it protects for your hardware's possible jitter). If you have done this correctly, all values will be green. If some ranges fall within each other, the respective values will become amber, signaling that you need to correct them. We pre-calculate default values for you too, so you can click on LSK R6 to get those, and see if you like them. In the example above, I have no reverse thrust position settings defined, as my joystick does not have reverser action - however, I could, if I wanted to, set my REV MAX and REV IDLE positions starting at the full closed joystick setting, but that would mean I'd need to physically mark on my joystick lever where the FWD IDLE position would be. Here's where the visual cues ON setting helps... Keyboard action is a bit easier to grasp: F2 and F3 buttons move the A320 levers back / fwd respectively (as normal). F1 and F4 are a bit different: They are used to move the thrust lever to the next gate, rather than to full back / full forward position. That means that if you are at FWD IDLE, you press F4 to move to CL, then F4 again to move to FLX MCT, and another F4 to move to TOGA respectively. Similarly with F1 - each key press moves the thrust lever back one gate (sound "click" position helps to identify this action). We hope this makes your simming experience a bit more realistic when it comes to thrust controls! Let us know what you think!