Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation since 08/29/13 in Files

  1. Version 2.0.0.15

    71200 downloads

    ---Now supports Prepar3D v4.1 to v4.5 --- Flight Sim Labs, Ltd. announces the availability of FSLSpotlights v2.0, a revolutionary new product for Lockheed Martin's Prepar3D v4.1 (and above) that allows the simmer to import and control up to 60 different fully three-dimensional dynamic spot lights in any existing aircraft virtual cockpit. Each light can be used individually as a single lamp or put together in groups with a single on/off switch and a brightness regulator control. Light attributes (beam position, pitch, heading, angle, range, attenuation, color) can be modified and parameterized to provide the correct look and feel depending on desired light type: This way, the user can add narrow focused lights to shine on map holders or tray tables, series of smaller lamps for main panel flood lighting or wide dome lamps for turning a dark cockpit into a lit area. Each lamp holds its own attributes which can be tweaked using a configuration manager that runs as a separate process and communicates continuously with Prepar3D, giving the simmer an unlimited number of lighting configurations and setups.
    96 points
  2. Version 1.0.4

    4655 downloads

    Repaint of Alaska Airlines N625VA P3D v4 compatibility. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. A Readme with instructions are included in the archive for installing into P3D v3 & FSX. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New fuselage, tail and engine specular maps (Thanks to Daniel Du Preez for these) New wing textures (Thanks to Christian Mohr for these) Updated CFM details (Thanks to Hugo Bicho for these)
    35 points
  3. Version 5.0.0.3

    22131 downloads

    ---Supports Prepar3D v5.x - for previous Prepar3D versions, please look at FSL Spotlights v2.0 and earlier --- Flight Sim Labs, Ltd. announces the availability of FSLSpotlights v5.0, a revolutionary new product for Lockheed Martin's Prepar3D v5.0 (and above) that allows the simmer to import and control up to 60 different fully three-dimensional dynamic spot lights in any existing aircraft virtual cockpit. Each light can be used individually as a single lamp or put together in groups with a single on/off switch and a brightness regulator control. Light attributes (beam position, pitch, heading, angle, range, attenuation, color) can be modified and parameterized to provide the correct look and feel depending on desired light type: This way, the user can add narrow focused lights to shine on map holders or tray tables, series of smaller lamps for main panel flood lighting or wide dome lamps for turning a dark cockpit into a lit area. Each lamp holds its own attributes which can be tweaked using a configuration manager that runs as a separate process and communicates continuously with Prepar3D, giving the simmer an unlimited number of lighting configurations and setups.
    33 points
  4. Version 1.0.1

    6386 downloads

    RD FSL A32X VC Mod'™ README: This is a High quality Screen Reflection texture,Carpet replacement,Checklist placement,Logo replacement and ND/PFD Display colour correction profile for the FSL A32X. This Includes: -VC Screen Reflection Texture -PFD Colour profile -Carpet realistic without the FSL logo -Checklist on sides of the pestal in Checklist Holder -Airbus Logo on Manuals ------------------------------------------------------------------------------- 1.ND/PFD Reflection Mod Installation: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC ND/PFD Reflection Mod: Files: VCDisplay.dds ------------------------------------------------------------------------------- 2.ND/PFD Display colour profile Installation: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\A320\Data ND/PFD Display colour profile Files: LCDColours.ini + LCDPens.ini ------------------------------------------------------------------------------- 3.Carpet & Carpet VC without FSL Logo's Installation:: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC Carpet & Carpet VC: Files: Carpet.dds + CarpetVC.dds ------------------------------------------------------------------------------- 4.Checklist in Checklist Holder + Airbus Logo on Manuals Installation:: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC Checklist in Checklist Holder + Airbus Logo on Manuals: Files: VC-3_t.dds + VC-1_t.dds *If you fly from CPT side use the VC-3_t.dds from the CPT Side folder and if you fly from FO side use the VC-3_t.dds from the FO Side folder* ------------------------------------------------------------------------------- Credit to Daniel welsh and Thomas Klein helping to suppyling some of these files! +Do not upload / share this file without permission from Robin C and/or Dean Or FSL Feel to visit our website. https://www.rdpresets.com ---------------------------------------------------------------------------------- Thank you for choosing the RD FSL A32X Mod! - Dean J & Robin C
    30 points
  5. Version 1.0.0

    2159 downloads

    Repaint of British Airways A319 G-EUPJ in the BEA Retro Livery P3Dv4 ONLY. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. Created using highly detailed custom paint kit. If you like this paint and my other work then why not shout me a beer or cup of coffee? https://www.paypal.me/texturesbytavers
    29 points
  6. Version 1.2

    890 downloads

    IMPORTANT: This livery requires the following download to be installed to appear as intended https://forums.flightsimlabs.com/index.php?/files/file/2940-common-files-for-fsl-a321-v501100-custom-4k-pbr-textures/. Please ensure that you have installed this required package before attempting to install this livery. This livery works with both v4 and v5. Airbus A321-321 Lufhansa D-AIDT created using a custom 4K PBR paint kit developed by @Hugo Bicho @Daniel Du Preez and @John Tavendale Features a complete overhaul of the default FSL A321 paint kit including: Custom 4K textures with accurate seam panelling, fuselage section joins and rivets Custom 4K metallic maps (PBR) with baked ambient occlusion (AO) effects Custom 4K normal maps for fuselage, engines, wings and tail Reworked landing gear including tyres and struts with custom PBR effects Enhancements to aircraft overlay textures, including PBR effects Custom dirt effects Installation instructions: Install the contents of the Common Files download located at https://forums.flightsimlabs.com/index.php?/files/file/2940-common-files-for-fsl-a321-v501100-custom-4k-pbr-textures/ using the provided instructions Drag the Texture DLH D-AIDT and Airframe Configs (if present) folders contained in this download to your {Prepar3D v5 Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A321 IAE folder Installation is complete! Start P3D and search for D-AIDT to load the aircraft Copyright and legal: This work is protected by international intellectual property and copyright laws. Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the author. A lot of time and effort was spent creating this repaint. Please respect our work. John Tavendale - jtavendale@gmail.com Creating these liveries takes a lot of time and effort. If you like my work, why not show your appreciation with a small donation https://paypal.me/texturesbytavers Any donations are highly appreciated but never required.
    27 points
  7. Version 1.0.3

    1172 downloads

    This is an alternative VC texture pack for Fslabs A319/320/321. Sharklets variants included. These textures were tested and optimized to work with P3D V5.3 with EA and HDR enabled. Features are: Optimized to work with EA and HDR, P3D V5.3. Envshade optimization setting (read readme file). Complete rework of main panel. Custom buttons, switches and dirt effects. Complete rework of lower main panels. Complete rework of overhead panels. Complete rework of cabin door. Rework and enhancements of chairs. Enhancements and rework of other VC files, oxygen mask, windows, carpets and etc. Pack include all files required to work with SL variants. Please read Instruction carefully!!! YOU ARE NOT ALLOWED TO UPLOAD, MODIFY OR SHARE ANY OF THE CONTENT PROVIDED IN THIS DOWNLOAD ANYWHERE WITHOUT MY WRITTEN PERMISSION!! It took me a lot time and effort to create these textures, so if you like them, don't forget to leave positive feedback, or just say thanks. Also, If you like my work, why not show your appreciation with a small PayPal donation? Any donations are highly appreciated but never required. Paypal
    24 points
  8. Version 1.0.0

    1619 downloads

    ONLY FOR V.2.0.2.300+ Eurowings Hertz 100 Years A320-214 D-ABDU Thanks to @Hugo Bicho for letting me use his cabin textures! https://forums.flightsimlabs.com/index.php?/files/file/1789-eurowings-cabin-textures-a319-a320/ by outwithnade
    24 points
  9. Version 2.4

    2005 downloads

    This is a freeware Lua script, which automatically plays the callouts you would hear from the pilot monitoring (PM) in an Airbus flight deck during takeoff and landing (including rejected takeoff, go-around and touch-and-go). It can be used together with the A319, A320 and A321 add-ons (including Sharklets). Questions and discussion: Demo Videos: Note: (bad performance in videos may come from recording, in-sim performance was good) Installation: - Please follow the included readme. What it does: - The script runs automatically upon loading the FSLabs Airbus (if FSUIPC profiles are set up correctly). - Upon advancing the thrust levers for takeoff, the PM will open the PERF page on his MCDU, allowing the script to fetch the takeoff speeds. - The following callouts are included: # Takeoff: FLEX SET / TOGA SET, 100 KNOTS, VEE ONE, ROTATE, POSITIVE CLIMB, CLIMB SET # Landing: SPOILERS, REVERSE GREEN, DECEL, 70 KNOTS # Gear confirmation: GEAR UP, GEAR DOWN # Flaps confirmation: FLAPS UP, FLAPS 1, FLAPS 2, FLAPS 3, FLAPS FULL # Special: STOP (rejected takeoff), STAND UP, GO (touch-and-go) - The script recognizes the phase of flight to play the correct callouts. Multiple legs are possible. Credits: - The fetching of the MCDU V-speeds is the work of @Peter Pukhnoy. Huge thanks to him for his contribution to this project. - The free Lua socket library is made by Diego Nehab. It is available at https://github.com/diegonehab/luasocket . - Free TTS sounds included in this package are recorded from ttsmp3.com (British English / Brian). - Included UK real voice pack was recorded by @Nick Kidd. Thank you! Important Notes: - Registered version of FSUIPC is REQUIRED! - This was only tested on Prepar3D 4.x, FSUIPC5 and together with the FSLabs A320X addon (A319, A320, A321, Sharklets). - This script needs to read multiple files on your system to work properly (all belonging to the core sim or the FSLabs installation). If you don't like that, please don't use this script. Disclaimer: This script is free software. It comes without any warranty. Use this at your own risk. I am not responsible for anything you do with it, or for any possible damage that comes out of using it. You can modify the script for your own personal use, but I ask you to refrain from redistributing it without my permission. Thank You.
    24 points
  10. Version 1.0.0

    632 downloads

    !!! NOTE: READ THESE INSTRUCTIONS CAREFULLY !!! *** FOR FSL A319 v5.0.100+ ONLY *** IMPORTANT: This livery requires the following download to be installed to appear as intended https://forums.flightsimlabs.com/index.php?/files/file/2634-common-files-for-fsl-a319-v501100-custom-4k-pbr-paint-kit-120/. Please ensure that you have installed this required package before attempting to install this livery. Airbus A319-112 CFM Lufthansa D-AIBA created using a custom 4K PBR paint kit developed by @Hugo Bicho @Daniel Du Preez and @John Tavendale Features a complete overhaul of the default FSL A319 paint kit including: Custom 4K textures with accurate seam panelling, fuselage section joins and rivets Custom 4K metallic maps (PBR) with baked ambient occlusion (AO) effects Custom 4K normal maps for fuselage, engines, wings and tail Reworked landing gear including tyres and struts with custom PBR effects Enhancements to aircraft overlay textures, including PBR effects Custom dirt effects Installation instructions: Install the contents of the Common Files download located at https://forums.flightsimlabs.com/index.php?/files/file/2634-common-files-for-fsl-a319-v501100-custom-4k-pbr-paint-kit-120/ using the provided instructions Drag the Texture.DLH D-AIBAand Airframe Configs (if present) folders contained in this download to your {Prepar3D v5 Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A319 CFM folder Installation is complete! Start P3D and search for D-AIBA to load the aircraft Copyright and legal: This work is protected by international intellectual property and copyright laws. Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the author. A lot of time and effort was spent creating this repaint. Please respect our work. John Tavendale - jtavendale@gmail.com Creating these liveries takes a lot of time and effort. If you like my work, why not show your appreciation with a small donation https://paypal.me/texturesbytavers Any donations are highly appreciated but never required.
    24 points
  11. Version 2.0

    17907 downloads

    For A320 CFM56-5B4 variant. Based on the FCOM and QRH tables of a particular airplane and might not coincide with the data of MSN modeled by FSLabs. MS Excel REQUIRED. For any questions/suggestions feel free to contact me by PM.
    24 points
  12. Version 1.1.0

    13951 downloads

    !!! NOTE: READ THESE INSTRUCTIONS CAREFULLY !!! *** FOR FSL A320 v5.0.100+ ONLY *** This download is mandatory for liveries that are referenced by it as it contains shared common files that are required to change the appearance of common FSL A320 parts used in these repaints. About this file This is a shared library of modified textures that contains common files for the custom 4K PBR A320 v5.0.1.100+ paint kit created by Hugo Bicho, Daniel Du Preez and John Tavendale. A new Airplanes\FSLabs A32X\Texture.CommonProfHBJT folder has been created and common files shared with all repaints are included here. This saves on drive space and simplifies management of liveries created from the custom kit. Repaints made from this kit have a special texture.cfg file that references this folder as a fallback and will be shown on the model when loaded into P3D. Installation instructions: 1. Drag the FSLabs A32X folder contained in this download to your {Prepar3D v5 Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes folder 2. After installation, your {Prepar3D v5 Add-ons}FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A32X should look like this: 3. Installation is complete! You do not need to repeat this for any additional liveries that require this download if you’ve already completed the steps above Changes since last version: 15/12/2020 (v1.1) Fixed black rear NAV light assembly glass introduced in update v5.0.1.126 23/07/2020 (v1.0) RTW build, development changes not tracked publicly Features: Fuselage Custom 4K fuselage with accurate Airbus window shape and metallic frames, seam panelling, fuselage section joins and rivets Custom wing box with correct panelling and rivets, flap actuator mechanism and flap scuff plates Custom 4K metallic maps (PBR) Custom 4K baked ambient occlusion (AO) textures for metallic (PBR) maps Custom 4K normal maps with accurate 3D panelling details Enhancements to cockpit window area and cockpit window side sill Enhancements to APU service door area Custom trim plates and trim guide mechanism New wiper blades featuring custom PBR Anti-glare paint strip on nosecone area in front of cockpit windows New vertical stabiliser with accurate panelling and rivet configuration Dirt effects Wings / Horizontal Stabiliser Custom 4K wing albedo and PBR textures with optional flap scuff plating dependent on airframe Custom 4K baked ambient occlusion (AO) textures for metallic (PBR) maps Custom 4K normal maps with accurate 3D panelling details Reworked flap track fairings and wing panelling Improved wing shading and colour Reworked horizontal stabiliser textures Engines Custom CFM and IAE engine albedo and PBR textures with panelling and rivets Improved CFM and IAE engine intake areas with PBR effects Custom baked ambient occlusion (AO) textures for metallic (PBR) maps Custom normal maps with accurate 3D panelling details Reworked engine pylons that match wing colour more accurately PBR effects on pylon metallic parts Miscellaneous Reworked wheel, gear hub and landing gear strut textures PBR effects on landing gear Custom fuselage, door and engine overlay textures with PBR effects Custom cargo bay interior textures Custom cabin and galley textures Copyright and legal: This work is protected by international intellectual property and copyright laws. Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the authors. A lot of time and effort was spent creating this kit. Please respect our work. Hugo Bicho (hugo.bicho@hotmail.ch) - HB Textures https://www.facebook.com/hbtextures Daniel Du Preez (professormadman@gmail.com) - https://goo.gl/Ji9kH5 John Tavendale - Textures by Tavers https://www.facebook.com/texturesbytavers
    23 points
  13. Version 1.0

    1544 downloads

    Compatible with all FSLabs releases. See included install instructions. Special thanks to @Tim Vancauwenbergh for giving me highly detailed base material of the smurf repaint and @Jonas Dahlke for offering his wing dirt layer! Happy landings captains! Report findings to me...
    23 points
  14. Version v.1.5.0

    12598 downloads

    This A320 livery is in the new colors of Easyjet, registration G-EZTA. This is version 1.5.
    23 points
  15. Version 2.0

    2309 downloads

    Happy landings captains! Report findings to me...
    22 points
  16. Version 1.0.0

    2167 downloads

    Repaint of Qantas Link A320-232 VH-VQS P3D v4 compatibility. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. A ReadMe with instructions are included in the archive for installation into P3D v3/FSX. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New fuselage, tail and engine specular maps (Thanks to Daniel Du Preez for these) New wing textures (Thanks to Christian Mohr for these)
    22 points
  17. Version 1.0.1

    1152 downloads

    Repaint of Eurowings A319 D-ABGP P3D v4 compatibility only. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these) New engine inlet details (Thanks to Hugo Bicho for these) Updated blue section thanks for some feedback received.
    22 points
  18. Version 1.0.1

    1867 downloads

    Two versions included ( Dirty / Very Dirty ) Painters are free to use them for their repaints by giving me credit ( psd kit with layers included )
    22 points
  19. Version 1.0 - Build 38

    37415 downloads

    Flight Sim Labs, Ltd. announces the availability of FSLSpotlights, a revolutionary new product for Flight Simulator X (Steam edition included) and Lockheed Martin's Prepar3D that allows the simmer to import and control up to 20 different fully three-dimensional dynamic spot lights in any existing aircraft virtual cockpit. Each light can be used individually as a single lamp or put together in groups with a single on/off switch and a brightness regulator control. Light attributes (beam position, direction, angle, range, attenuation, color) can be modified and parameterized to provide the correct look and feel depending on desired light type: This way, the user can add narrow focused lights to shine on map holders or tray tables, series of smaller lamps for main panel flood lighting or wide dome lamps for turning a dark cockpit into a lit area. Each lamp holds its own attributes which can be tweaked using a configuration manager that runs as a separate process and communicates continuously with Flight Simulator X, giving the simmer an unlimited number of lighting configurations and setups.
    21 points
  20. Version 1.0.0

    2199 downloads

    Repaint of American Airlines N831AW P3D v4 compatibility. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. A ReadMe with instructions are included in the archive for installation into P3D v3/FSX. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these) Updated July 13. Added A319 under the nose Updated gear textures Added wing bump file.
    21 points
  21. Version 1.1.1

    1944 downloads

    ONLY FOR A319 v5.0.100+ Lufthansa A319-112 D-AIBC Installation instructions: Simply drag both the 'Texture.DLH D-AIBC' AND 'Airframe Configs' folders into your FSLabs A319 CFM simobjects folder (usually found at 'Documents\Prepar3D v4/5 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A319 CFM'). Features a complete overhaul of the default FSL A319 paint kit including: Custom 4K textures with accurate seam panelling, fuselage section joins and rivets. Custom 4K metallic maps (PBR) with baked ambient occlusion (AO) effects. Custom 4K normal maps for fuselage, engines, wings and tail. Reworked landing gear including tyres and struts with custom PBR effects. Enhancements to aircraft overlay textures, including PBR effects. Custom dirt effects. Special thanks to @Hugo Bicho, @Daniel Du Preez and @John Tavendale for the custom 4K A319 Paintkit. by outwithnade https://www.airformliveries.com/
    20 points
  22. Version 1.0.0

    378 downloads

    Airbus A319 D-AKNO of German low-cost carrier Germanwings featuring the “Berlin Bearbus” special livery. Special thanks to my dear friend @Marvin Mutz for testing and refining the smallest details on this repaint! For installation extract the contents of the archive to: FSLabs\SimObjects\Airplanes\FSLabs A319 CFM\ Please note that the livery is configured to be used with the EWG airline pack!
    20 points
  23. Version 1.0.0

    832 downloads

    Repaint of SAS OY-KBP P3D v4 compatibility. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. A ReadMe with instructions are included in the archive for installation into P3D v3/FSX. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these)
    20 points
  24. Version 2.0.0

    2451 downloads

    New cabin textures for easyJet. Hope you'll like it Featuring the 3 differents cabins that you'll find IRL on easyJet's planes ! by Hugo Bicho - New cabin seats / all the cabin has been improved - Ex. Air Berlin cabin with the old FAP showing Air Berlin's logo - New cabin seats of easyJet's newest A/C - And good old seats available inside their 319 For remarks or some reports : HB-TEXTURES on facebook
    19 points
  25. Version 2.3.6

    1048 downloads

    Requirements: FSUIPC (registered or unregistered) Prepar3D v4 or v5 Features: Actions such as setting the trim and flaps after engine start. Callouts - 'V1', 'rotate', flight control check etc. Voice commands (for example, for extending the flaps and landing gear during approach). Voice controlled checklists. Where feasible, the copilot cross-checks your response with the reality using the positions of the switches, the MCDU display and the ATSU log as sources. Auto-insertion of random failures into the MCDU at startup (optional). Joystick and keyboard binding facilities for FSLabs cockpit controls (including axes for knob controls). The voice control features are optional, however there are no substitutes for them when you disable voice control. The default functionality can be extended in many ways by the user. For example, you can replace the action flows with your own or add your own voice commands. Installation Detailed list of procedures Forum thread
    19 points
  26. Version 1.0.0

    904 downloads

    !!! NOTE: READ THESE INSTRUCTIONS CAREFULLY !!! *** FOR FSL A319 v5.0.100+ ONLY *** IMPORTANT: This livery requires the following download to be installed to appear as intended https://forums.flightsimlabs.com/index.php?/files/file/2634-common-files-for-fsl-a319-v501100-custom-4k-pbr-paint-kit-120/. Please ensure that you have installed this required package before attempting to install this livery. Airbus A319-131 British Airways G-EUPJ created using a custom 4K PBR paint kit developed by @Hugo Bicho @Daniel Du Preez and @John Tavendale Features a complete overhaul of the default FSL A319 paint kit including: Custom 4K textures with accurate seam panelling, fuselage section joins and rivets Custom 4K metallic maps (PBR) with baked ambient occlusion (AO) effects Custom 4K normal maps for fuselage, engines, wings and tail Reworked landing gear including tyres and struts with custom PBR effects Enhancements to aircraft overlay textures, including PBR effects Custom dirt effects Installation instructions: Install the contents of the Common Files download located at https://forums.flightsimlabs.com/index.php?/files/file/2634-common-files-for-fsl-a319-v501100-custom-4k-pbr-paint-kit-120/ using the provided instructions Drag the Texture.BAW G-EUPJ and Airframe Configs (if present) folders contained in this download to your {Prepar3D v5 Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A319 IAE folder Installation is complete! Start P3D and search for G-EUPJ to load the aircraft Copyright and legal: This work is protected by international intellectual property and copyright laws. Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the author. A lot of time and effort was spent creating this repaint. Please respect our work. John Tavendale - jtavendale@gmail.com Creating these liveries takes a lot of time and effort. If you like my work, why not show your appreciation with a small donation https://paypal.me/texturesbytavers Any donations are highly appreciated but never required.
    19 points
  27. Version 1.0.0

    3178 downloads

    Repainted almost entirely by scratch. Custom made photo-realistic wing, fuse, engine, tail and wing textures. All new bump and specular maps.Tiny details such as nose cone varieties and actual aircraft marks have been added to create the ultimate realism.
    19 points
  28. Version 1.1.0

    480 downloads

    Lufthansa A319 D-AIBA This livery features a realistic replica of the real D-AIBA including: Custom made weathering textures, the correct Lufthansa wings and completely reworked windows to fit the real Airbus windows. To install extract the livery inside : Users\<name>\Documents\Prepar3d v4/5 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A319 CFM\ These liveries take up a lot of time, so if you like my work and would like to support me, feel free to visit this page: Paypal Note this livery is only for v5.0.1.114+ YOU ARE NOT ALLOWED TO UPLOAD MY TEXTURES ANYWHERE WITHOUT MY PERMISSION!!!
    19 points
  29. Version 1.0.0

    1033 downloads

    Repaint of Lufthansa A319-100 D-AILW in the new livery. P3D v4 compatibility only. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these) New engine inlet details (Thanks to Hugo Bicho for these)
    19 points
  30. Version v2.0.1

    1960 downloads

    This Fleet-Pack includes all New Colour Lufthansa A319, with real cabin and airframe configuration files. These liveries were done with the Custom Paintkit by @Gregory Verba , @Enzo Dewit and @Florian Wolf To have these liveries fully working you MUST download this Common file: https://forums.flightsimlabs.com/index.php?/files/file/3034-files-for-a319-custom-paintkit-by-gv-ed-fw/ It took me a lot time and effort to create these liveries, so if you like them, reviews are always very welcome Also, If you like my work, why not show your appreciation with a small PayPal donation? Any donations are highly appreciated but never required. Paypal Installation: Copy the files to: Users\<name>\Documents\Prepar3d v4/v5 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A319 CFM\ YOU ARE NOT ALLOWED TO UPLOAD ANY OF THE CONTENT PROVIDED IN THIS DOWNLOAD ANYWHERE WITHOUT MY WRITTEN PERMISSION!!
    18 points
  31. Version 1.6.0

    2424 downloads

    ONLY FOR V.2.0.2.300+ SAS Scandinavian Airlines New Livery A320-232 OY-KAM Will update when more photos of the aircraft become available by outwithnade
    18 points
  32. Version 1.0.1

    655 downloads

    Lufthansa "Lu Livery" A319 This aircraft wears a special scheme displaying the mascot of Lufthansa's children flying program. The livery features a realistic replica of the real D-AILU including custom made stickers, the correct Lufthansa wing textures and completely reworked window textures to fit the real Airbus windows. These liveries take up a lot of time, so if you like my work and would like to support me, feel free to visit this page: Paypal Note this livery is only for v5.0.1.114+ To install extract the livery inside : Users\<name>\Documents\Prepar3d v4/5 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A319 CFM\ YOU ARE NOT ALLOWED TO UPLOAD MY TEXTURES ANYWHERE WITHOUT MY PERMISSION!!!
    18 points
  33. Version 1.0.2

    877 downloads

    A320-214 CFM in the livery of Aeroflot Russian Airlines. This airframe, VP-BWF (MSN 2144), is named after Russian composer Dmitri Shostakovich and was delivered to the airline on the 15th of December 2003. Unfortunately it was difficult to achieve the metallic silver paint and the aircraft texture mapping made it very difficult to get the nose a lighter shade by the cockpit areas without causing visual artefacts. I may revisit this again once FSL implements PBR but for now I'm uploading her as is as I've already spent too much time on this one! NOTE: For use with FSL A320 version 2.0.2.300+ only. Installation instructions included.
    18 points
  34. Version 1.0.3

    4692 downloads

    These are updated Tomatoshade profiles to work with the FSL A320-X and A319-X v347. IAE and CFM profiles for both A319-X and A320-X VC profiles - including an option for VC RAIN which enhances the rain effect
    18 points
  35. Version 1.0.0

    1070 downloads

    Repaint of EasyJet Europe OE-LQX. P3D v4 compatibility only. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these) New engine inlet details (Thanks to Hugo Bicho for these) EasyJet cabin textures (Thanks to Hugo Bicho for these too!)
    18 points
  36. Version 1.0.0

    761 downloads

    Repaint of EasyJet A319 G-EJAR with a special Unicef livery. P3D v4 compatibility only. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these) New engine inlet details (Thanks to Hugo Bicho for these) EasyJet cabin textures (Thanks to Hugo Bicho for these too!)
    18 points
  37. Version 1.0.0

    789 downloads

    Repaint of EasyJet Europe OE-LQY with Europcar decals. P3D v4 compatibility only. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these) New engine inlet details (Thanks to Hugo Bicho for these) EasyJet cabin textures (Thanks to Hugo Bicho for these too!)
    18 points
  38. Version 1.0.0

    552 downloads

    About This File This Fleet-Pack includes all Old Colour Lufthansa A319, with real cabin and airframe configuration files. These liveries were done with the Custom Paintkit by @Gregory Verba , @Enzo Dewit and @Florian Wolf To have these liveries fully working you MUST download this Common file: https://forums.flightsimlabs.com/index.php?/files/file/3034-files-for-a319-custom-paintkit-by-gv-ed-fw/ It took me a lot time and effort to create these liveries, so if you like them, reviews are always very welcome Also, If you like my work, why not show your appreciation with a small PayPal donation? Any donations are highly appreciated but never required. Paypal Package contains: D-AIBA D-AIBB Aalen D-AIBD Pirmasens D-AIBH Herborn D-AIBI Frankenthal (Pfalz) D-AILY Schweinfurt D-AILX Fellbach (Lufthansa CityLine) Installation: Copy the content inside the “Liveries+ LH Common” to: Users\<name>\Documents\Prepar3d v4/v5 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A319 CFM\ YOU ARE NOT ALLOWED TO UPLOAD ANY OF THE CONTENT PROVIDED IN THIS DOWNLOAD ANYWHERE WITHOUT MY WRITTEN PERMISSION!!
    17 points
  39. Version 1.0.0

    554 downloads

    Lufthansa Airbus A319 (Verden, D-AILU) For installation instructions please check the included readme.txt. Known issue: 'Lu' text on the left wing is mirrored. Unfortunately this can't be fixed due to the texture mapping of the wings. If you consider a donation, please visit paypal.me/mcnobody. Thanks! Note: FSL A319-X required. by Repaint Manufaktur
    17 points
  40. Version 1.0.1

    1269 downloads

    ONLY FOR V.5.0.1.103+ Lufthansa A321-231 D-AIDN Thanks to @Hugo Bicho & @John Tavendale for their custom 4K A321 paintkit. by outwithnade https://www.airformliveries.com/
    17 points
  41. Version 1.0.0

    1517 downloads

    Repaint of American Airlines A321-211 N188US. Updated for P3D v5 & V4 I have teamed up with @Hugo Bicho to create a highly detailed custom paint kit for the A321 featuring custom base, bump and metallic textures. If you like this paint and my other work then why not shout me a beer or cup of coffee? https://www.paypal.me/texturesbytavers
    17 points
  42. Version 1.2

    1585 downloads

    Repaint of Scandinavian Airlines System Retro OY-KBO P3D v4 compatibility. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. A ReadMe with instructions are included in the archive for installation into P3D v3/FSX. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these) Includes white right engine texture
    17 points
  43. Version 1.1.0

    1471 downloads

    This the HD replacement of original pedestal fonts for all FSLabs Airbus models.
    17 points
  44. Version 1.0.0

    1172 downloads

    Repaint of easyJet's G-EZTD in the new livery. Highly detailed repaint created using a custom paint kit with matching bump maps. Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New fuselage, tail and engine specular maps (Thanks to Daniel Du Preez for these) New wing textures (Thanks to Christian Mohr for these)
    17 points
  45. Version 1.0.0

    1313 downloads

    First of all, I'd like to emphasize on the great job FSL team did on the matter. I, in no way state, that current FSL Flight Control system is wrong or incomplete. Every simmer has a different hardware. The real A32X has extremely difficult to replicate sidestick as it has a staged pneumatic damping by itself. The real "hardware" provides very specific feels and relies on muscle memory. As such, everyone's perception for it's operation may differ. Even among real pilots. We use different techniques, fly in different companies, at different weights and in different conditions. Me, as a real A319 (in the past), A320 (current) and A321 (current) pilot would like to provide my personal vision as to how i perceive the feeling of the A32X flight controls. For me*, the following guide provides closer to the real A/C feel, especially during LANDINGS. *the guide is based on Logitech Extreme 3D joystick. It should be applicable to similarly cheap and low range sticks and probably will have NEGATIVE results on high-end, high range, more expensive joysticks. Feel Icon.bmp
    16 points
  46. Version 1.0.2

    651 downloads

    ONLY FOR A319 v5.0.1.100+ Scandinavian Airlines A319-131 OY-KBT Installation instructions: Install the common files found at https://forums.flightsimlabs.com/index.php?/files/file/2634-common-files-for-fsl-a319-v501100-custom-4k-pbr-textures/. These are ESSENTIAL for the paint to work. Simply drag both the 'Texture.SAS OY-KBT' AND 'Airframe Configs' folders into your FSLabs A319 IAE simobjects folder (usually found at 'Documents\Prepar3D v4/5 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A319 IAE'). Features a complete overhaul of the default FSL A319 paint kit including: Custom 4K textures with accurate seam panelling, fuselage section joins and rivets. Custom 4K metallic maps (PBR) with baked ambient occlusion (AO) effects. Custom 4K normal maps for fuselage, engines, wings and tail. Reworked landing gear including tyres and struts with custom PBR effects. Enhancements to aircraft overlay textures, including PBR effects. Custom dirt effects. Special thanks to @Hugo Bicho, @Daniel Du Preez and @John Tavendale for the custom 4K A319 Paint kit. Creating these paints takes a lot of time so a donation is greatly appreciated! - https://www.paypal.me/outwithnade
    15 points
  47. Version 1.0.2

    418 downloads

    !!! NOTE: READ THESE INSTRUCTIONS CAREFULLY !!! *** FOR FSL A321 v5.0.100+ ONLY *** IMPORTANT: This livery requires the following download to be installed to appear as intended https://forums.flightsimlabs.com/index.php?/files/file/2940-common-files-for-fsl-a321-v501100-custom-4k-pbr-textures/. Please ensure that you have installed this required package before attempting to install this livery. Airbus A321-231 IAE Turkish Airlines "Discover Turkey" TC-JRG created using a custom 4K PBR paint kit developed by @Hugo Bicho @Daniel Du Preez and @John Tavendale. Features a complete overhaul of the default FSL A321 paint kit including: Custom 4K textures with accurate seam panelling, fuselage section joins and rivets Custom 4K metallic maps (PBR) with baked ambient occlusion (AO) effects Custom 4K normal maps for fuselage, engines, wings and tail Reworked landing gear including tyres and struts with custom PBR effects Enhancements to aircraft overlay textures, including PBR effects Custom dirt effects Installation instructions: Install the contents of the Common Files download located at https://forums.flightsimlabs.com/index.php?/files/file/2940-common-files-for-fsl-a321-v501100-custom-4k-pbr-textures/ using the provided instructions Drag the Texture.THY TC-JRG and Airframe Configs (if present) folders contained in this download to your {Prepar3D v5 Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A321 IAE folder Installation is complete! Start P3D and search for TC-JRG to load the aircraft Copyright and legal: This work is protected by international intellectual property and copyright laws. Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the author. A lot of time and effort was spent creating this repaint. Please respect our work. Daniel Du Preez (professormadman@gmail.com) - https://goo.gl/Ji9kH5 Creating these liveries takes a lot of time and effort. If you like my work, why not show your appreciation with a small PayPal donation? Any donations are highly appreciated but never required.
    15 points
  48. Version 1.0.1

    809 downloads

    Repaint of Aegean SX-DGF P3D v4 compatibility. You can simply drop the Texture.XXX folder into your sim and the aircraft will automatically be added to the vehicles list. A ReadMe with instructions are included in the archive for installation into P3D v3/FSX. Features Created using detailed custom paintkit with custom bump textures Updated Fresnel light maps meaning lower sun glare and accurate colour reproduction. New wing textures (Thanks to Christian Mohr for these)
    15 points
  49. Version 1.0.0

    341 downloads

    A321 "CAUTION TAILSTRIKE" Decal Modeled after a decal found on the American Airlines A321 fleet. Points out to the pilot to keep in mind they are in the stretched variant. Especially useful for mixed fleet flying where you could spend 3 days buzzing around in an A319 and then get your fourth day in the A321. Just paste into the Texture.xx folder you wish to use the decal on.
    15 points
  50. Version 1.0.0

    987 downloads

    *** IMPORTANT - Use of this mod is at your OWN risk *** I spent many hours creating entirely new textures for the FSLabs A320 CFM variant and this is the result. You should be able to use these textures with any FSL A320 CFM variant as the textures included here do not contain livery specific details. Saying that though, they were specifically crafted to match my repaints' specular maps and general aesthetic and may look "out of place" in default liveries or ones created by third parties due to specular map differences. Features: - All new pylon textures with two variations based on aircraft age/operator. - New engine intake textures. - New fan blades. - New spinner texture. - Colour-matched to Christian Mohr's wing textures. ________________________________________________________________________________________________________ Installation instructions: These textures are "drop in" and can be used with any existing FlightSimLabs CFM A320 without affecting your livery. Decide on which pylon variant you want to use for your livery. A google image search for your aircraft registration will usually indicate which variant to use. Copy the contents of CFM Variation 1 (New Style) folder or the CFM Variation 2 (Old Style) in this archive into your FSLabs A320 SimObjects\Airplanes\FSLabs A320 CFM\Texture.XXX folder where XXX is the livery you want to use them for. Overwrite any files if asked to. Go fly! Should you choose to use a specific set for *ALL* of your CFM liveries (without having to copy them to each livery's folder) then you can: Place turbine-metal_t.dds, turbine-metal_t_bump.dds and turbine-metal_t_spec.dds in SimObjects\Airplanes\FSLabs A32X\Texture, overwriting the existing files (BACK UP ALL THE ORIGINALS FIRST). Place turbine_fast_CFM_t.dds and turbine-slow_CFM_t.dds in SimObjects\Airplanes\FSLabs A320 CFM\Texture, overwriting the existing files (BACK UP ALL THE ORIGINALS FIRST). NOTE: I increased the size of the turbine-metal_t.dds file to 2048x2048 to retain some of the detail I added. FSX/P3Dv3.x and earlier may exhibit increased VAS usage due to this. ________________________________________________________________________________________________________ Variation 1 Preview: ________________________________________________________________________________________________________ Variation 2 Preview:
    15 points
×
×
  • Create New...