Leaderboard

!!! NOTE: READ THESE INSTRUCTIONS CAREFULLY !!! *** FOR FSL A320 v5.0.100+ ONLY *** This download is mandatory for liveries that are referenced by it as it contains shared common files that are required to change the appearance of common FSL A320 parts used in these repaints. About this file This is a shared library of modified textures that contains common files for the custom 4K PBR A320 v5.0.1.100+ paint kit created by Hugo Bicho, Daniel Du Preez and John Tavendale. A new Airplanes\FSLabs A32X\Texture.CommonProfHBJT folder has been created and common files shared with all repaints are included here. This saves on drive space and simplifies management of liveries created from the custom kit. Repaints made from this kit have a special texture.cfg file that references this folder as a fallback and will be shown on the model when loaded into P3D. Installation instructions: 1. Drag the FSLabs A32X folder contained in this download to your {Prepar3D v5 Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes folder 2. After installation, your {Prepar3D v5 Add-ons}FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A32X should look like this: 3. Installation is complete! You do not need to repeat this for any additional liveries that require this download if you’ve already completed the steps above Changes since last version: 23/07/2020 (v1.0) RTW build, development changes not tracked publicly Features: Fuselage Custom 4K fuselage with accurate Airbus window shape and metallic frames, seam panelling, fuselage section joins and rivets Custom wing box with correct panelling and rivets, flap actuator mechanism and flap scuff plates Custom 4K metallic maps (PBR) Custom 4K baked ambient occlusion (AO) textures for metallic (PBR) maps Custom 4K normal maps with accurate 3D panelling details Enhancements to cockpit window area and cockpit window side sill Enhancements to APU service door area Custom trim plates and trim guide mechanism New wiper blades featuring custom PBR Anti-glare paint strip on nosecone area in front of cockpit windows New vertical stabiliser with accurate panelling and rivet configuration Dirt effects Wings / Horizontal Stabiliser Custom 4K wing albedo and PBR textures with optional flap scuff plating dependent on airframe Custom 4K baked ambient occlusion (AO) textures for metallic (PBR) maps Custom 4K normal maps with accurate 3D panelling details Reworked flap track fairings and wing panelling Improved wing shading and colour Reworked horizontal stabiliser textures Engines Custom CFM and IAE engine albedo and PBR textures with panelling and rivets Improved CFM and IAE engine intake areas with PBR effects Custom baked ambient occlusion (AO) textures for metallic (PBR) maps Custom normal maps with accurate 3D panelling details Reworked engine pylons that match wing colour more accurately PBR effects on pylon metallic parts Miscellaneous Reworked wheel, gear hub and landing gear strut textures PBR effects on landing gear Custom fuselage, door and engine overlay textures with PBR effects Custom cargo bay interior textures Custom cabin and galley textures Copyright and legal: This work is protected by international intellectual property and copyright laws. Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the authors. A lot of time and effort was spent creating this kit. Please respect our work. Hugo Bicho (hugo.bicho@hotmail.ch) - HB Textures https://www.facebook.com/hbtextures Daniel Du Preez (professormadman@gmail.com) - https://goo.gl/Ji9kH5 John Tavendale - Textures by Tavers https://www.facebook.com/texturesbytavers

ONLY FOR V.5.0.1.103+ Lufthansa A321-231 D-AIDN Thanks to @Hugo Bicho & @John Tavendale for their custom 4K A321 paintkit. by outwithnade https://www.airformliveries.com/

ONLY FOR V.5.0.1.103+ Scandinavian Airlines A321-232 OY-KBH Thanks to @Hugo Bicho & @John Tavendale for their custom 4K A321 paintkit. by outwithnade https://www.airformliveries.com/

This is a repaint of the only Condor A321-200 D-ATCA without Sharklets. (updated now for P3Dv4/v5) Changes to the previous version: - new fonts - new engine textures - removed some decals Thanks to @John Tavendale for using some parts of his modified paintikit. A readme with instructions is included. Also visit my Facebook Page CFG-Repaints If you like my work and want to pay a little attention to me: paypal.me/cfgrepaints

ONLY FOR V.5.0.1.103+ British Airways A321-231 G-EUXH Thanks to @Hugo Bicho & @John Tavendale for their custom 4K A321 paintkit. Thanks to @Hugo Bicho for his British Airways cabin textures. by outwithnade https://www.airformliveries.com/

ONLY FOR V.5.0.1.103+ British Airways A321-231 Fleet Pack This pack includes: G-EUXC, G-EUXD, G-EUXE, G-EUXF, G-EUXG, G-EUXH, G-EUXI, G-EUXJ, G-EUXK, G-EUXL, G-EUXM, G-MEDF, G-MEDG, G-MEDJ, G-MEDL, G-MEDM, G-MEDN, G-MEDU by outwithnade Thanks to @Hugo Bicho & @John Tavendale for their custom 4K A321 paintkit. Thanks to @Hugo Bicho for his British Airways cabin textures. https://www.airformliveries.com/

Repaint of American Airlines A321-231 N919US Updated for P3D v5 & V4 I have teamed up with @Hugo Bicho to create a highly detailed custom paint kit for the A321 featuring custom base, bump and metallic textures. If you like this paint and my other work then why not shout me a beer or cup of coffee? https://www.paypal.me/texturesbytavers

Repaint of American Airlines A321-211 N188US. Updated for P3D v5 & V4 I have teamed up with @Hugo Bicho to create a highly detailed custom paint kit for the A321 featuring custom base, bump and metallic textures. If you like this paint and my other work then why not shout me a beer or cup of coffee? https://www.paypal.me/texturesbytavers

ONLY FOR V.5.0.1.103+ Thomas Cook (MT/TCX) 'I <3 Cooks Club' G-TCDV This is a Thomas Cook, registration G-TCDV 'I <3 Cooks Club' repaint for the FSLabs A321-X CFM. This livery also features accurate aircraft data such as the real world airframe weights. Thanks to @Hugo Bicho and @John Tavendale for their custom 4K A321 paintkit. If you like these liveries why not buy me a coffee. All donations are heavily appreciated. https://paypal.me/MatthewAshman https://www.airformliveries.com

ONLY FOR V.5.0.1.103+ Scandinavian Airlines A321-232 LN-RKK Thanks to @Hugo Bicho & @John Tavendale for their custom 4K A321 paintkit. by outwithnade https://www.airformliveries.com/

Repaint of British Airways A321 G-EUXK Updated for v5 & v4 I have teamed up with @Hugo Bicho to create a highly detailed custom paint kit for the A321 featuring custom base, bump and metallic textures. If you like this paint and my other work then why not shout me a beer or cup of coffee? https://www.paypal.me/texturesbytavers

ONLY FOR V.5.0.1.103+ Alitalia A321-112 I-BIXS Thanks to @Hugo Bicho & @John Tavendale for their custom 4K A321 paintkit. by outwithnade https://www.airformliveries.com/

LATAM Brasil A321-231 PT-MXE repaint made for v5.0.1.100+ Installation instructions: - Extract the folder "Texture.TAM PT-MXE" into %userdata%\Documents\Prepar3D v5 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A321 IAE Any questions and/or suggestions please PM me.

Inspired by German Airforce A321 10-04 + modified windows / windows textures / reflections + some more things to add. more info : https://www.facebook.com/NNiSimulations/ Nicolas

This file included a texture replacement to fix the white MCP button lights which are supposed to be green but due to P3Ds v4 HDR they are white. Read-me included. Screenshots attached below (P3D v4 HDR on) These are my HDR settings - HDR_BLOOM_THRESHOLD=3.000000 HDR_BLOOM_MAGNITUDE=0.000000 HDR_BLOOM_BLUR_SIGMA=0.800000 Donations are not necessary but always appreciate a cup of coffee you donate by clicking here - https://www.paypal.me/hardiq10 Hope you enjoy the sounds! more coming up! TOGAMods

Lufthansa Airbus A321-231 4k-repaint made for the new update v5.0.1.103+ Thx for downloading my A321-X PBR-based repaint of D-AIDB! Its compatible with the latest version of the A321-X v5.0.1.103! All credit is going to @Hugo Bicho and @John Tavendale for their custom made paintkit which has been made available for me to use! They reworked all areas in such a nice detail and with it, its a pleasure to use it. Thank you so much guys! I tried to apply all details found but of course, its not perfect Enjoy as well a "as real as possible" made airframe config! --------------------------------------------------------------------------------------------------- Please have a look into the readme included! --------------------------------------------------------------------------------------------------- Credits: Custom paintkit by Hugo Bicho and John Tavendale If you find anything wrong/missing, just leave me a message. Happy flying! Timm https://www.facebook.com/V1Simulations Increase the immersion by using these packages additional:

Thomas Cook G-NIKO, setup with correct airframe, cabin, FMS and window configurations. Make sure you also install the Thomas Cook Airline Pack - available here:

Thomas Cook G-TCDA, setup with correct airframe, cabin, FMS and window configurations. Make sure you also install the Thomas Cook Airline Pack - available here:

Thomas Cook custom repaint, in "I LOVE COOK's CLUB' livery. The airframe is setup with correct options and weights.

Thomas Cook G-TCDW, setup with correct airframe, cabin, FMS and window configurations. Make sure you also install the Thomas Cook Airline Pack - available here:

For more liveries check RDPresets.com

For more liveries check RDPresets.com

This A321 livery is in the colours of easyJet, registration G-TTIF. This is version 5.0

This A321 livery is in the colors of Aeroflot, registration VQ-BEA. This is version 5.0

This paint kit is for PBR-only liveries produced for the A320-X v5.0.xx for P3D v5.0HF2 (and backwards compatible with P3Dv4.5HF3).

---Supports Prepar3D v5.0 - for previous Prepar3D versions, please look at FSL Spotlights v2.0 and earlier --- Flight Sim Labs, Ltd. announces the availability of FSLSpotlights v5.0, a revolutionary new product for Lockheed Martin's Prepar3D v5.0 (and above) that allows the simmer to import and control up to 60 different fully three-dimensional dynamic spot lights in any existing aircraft virtual cockpit. Each light can be used individually as a single lamp or put together in groups with a single on/off switch and a brightness regulator control. Light attributes (beam position, pitch, heading, angle, range, attenuation, color) can be modified and parameterized to provide the correct look and feel depending on desired light type: This way, the user can add narrow focused lights to shine on map holders or tray tables, series of smaller lamps for main panel flood lighting or wide dome lamps for turning a dark cockpit into a lit area. Each lamp holds its own attributes which can be tweaked using a configuration manager that runs as a separate process and communicates continuously with Prepar3D, giving the simmer an unlimited number of lighting configurations and setups.

Registered FSUIPC 5.154 or later is required. Features: Actions such as setting the trim and flaps after engine start. Callouts - 'V1', 'rotate' etc. Optional voice commands for triggering some of the actions Installation Detailed list of procedures Special thanks to @Hannes Altmann and @Nick Kidd for recording the callouts.

First of all, I'd like to emphasize on the great job FSL team did on the matter. I, in no way state, that current FSL Flight Control system is wrong or incomplete. Every simmer has a different hardware. The real A32X has extremely difficult to replicate sidestick as it has a staged pneumatic damping by itself. The real "hardware" provides very specific feels and relies on muscle memory. As such, everyone's perception for it's operation may differ. Even among real pilots. We use different techniques, fly in different companies, at different weights and in different conditions. Me, as a real A319 (in the past), A320 (current) and A321 (current) pilot would like to provide my personal vision as to how i perceive the feeling of the A32X flight controls. For me*, the following guide provides closer to the real A/C feel, especially during LANDINGS. *the guide is based on Logitech Extreme 3D joystick. It should be applicable to similarly cheap and low range sticks and probably will have NEGATIVE results on high-end, high range, more expensive joysticks. Feel Icon.bmp

This is the A321-X Paint Kit.

New cabin textures for Lufthansa. Hope you'll like it Featuring cabins that you'll find IRL on Lufthansa's planes ! by Hugo Bicho - New cabin seats / all the cabin has been improved Many thanks to @Pascal Ad For remarks or some reports : HB-TEXTURES on facebook

---Now supports Prepar3D v4.1 to v4.5 --- Flight Sim Labs, Ltd. announces the availability of FSLSpotlights v2.0, a revolutionary new product for Lockheed Martin's Prepar3D v4.1 (and above) that allows the simmer to import and control up to 60 different fully three-dimensional dynamic spot lights in any existing aircraft virtual cockpit. Each light can be used individually as a single lamp or put together in groups with a single on/off switch and a brightness regulator control. Light attributes (beam position, pitch, heading, angle, range, attenuation, color) can be modified and parameterized to provide the correct look and feel depending on desired light type: This way, the user can add narrow focused lights to shine on map holders or tray tables, series of smaller lamps for main panel flood lighting or wide dome lamps for turning a dark cockpit into a lit area. Each lamp holds its own attributes which can be tweaked using a configuration manager that runs as a separate process and communicates continuously with Prepar3D, giving the simmer an unlimited number of lighting configurations and setups.

The combination of the modified PFPX OFP and FlightsimLabs regex file adds capture of Cost Index and TOC temperature. Be sure to view the README file !

These are replacement mcdu.html files for optimal experience on iPads. For more information, please read included PDF file. Enjoy!

RD FSL A32X VC Mod'™ README: This is a High quality Screen Reflection texture,Carpet replacement,Checklist placement,Logo replacement and ND/PFD Display colour correction profile for the FSL A32X. This Includes: -VC Screen Reflection Texture -PFD Colour profile -Carpet realistic without the FSL logo -Checklist on sides of the pestal in Checklist Holder -Airbus Logo on Manuals ------------------------------------------------------------------------------- 1.ND/PFD Reflection Mod Installation: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC ND/PFD Reflection Mod: Files: VCDisplay.dds ------------------------------------------------------------------------------- 2.ND/PFD Display colour profile Installation: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\A320\Data ND/PFD Display colour profile Files: LCDColours.ini + LCDPens.ini ------------------------------------------------------------------------------- 3.Carpet & Carpet VC without FSL Logo's Installation:: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC Carpet & Carpet VC: Files: Carpet.dds + CarpetVC.dds ------------------------------------------------------------------------------- 4.Checklist in Checklist Holder + Airbus Logo on Manuals Installation:: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC Checklist in Checklist Holder + Airbus Logo on Manuals: Files: VC-3_t.dds + VC-1_t.dds *If you fly from CPT side use the VC-3_t.dds from the CPT Side folder and if you fly from FO side use the VC-3_t.dds from the FO Side folder* ------------------------------------------------------------------------------- Credit to Daniel welsh and Thomas Klein helping to suppyling some of these files! +Do not upload / share this file without permission from Robin C and/or Dean Or FSL Feel to visit our website. https://www.rdpresets.com ---------------------------------------------------------------------------------- Thank you for choosing the RD FSL A32X Mod! - Dean J & Robin C

This paint kit is for PBR-only liveries produced for the A321-X v5.0.xx for P3D v5.0HF2 (and backwards compatible with P3Dv4.5HF3).