Jump to content

A320-X - Unsupported Mods

This category is for A320-X modifications that our users might find useful, but are currently officially unsupported.

35 files

  1. Common Files for FSL A319 v5.0.1.100+ Custom 4K PBR Paint Kit 1.0.0

    !!! NOTE: READ THESE INSTRUCTIONS CAREFULLY !!!
     
    *** FOR FSL A319 v5.0.100+ ONLY ***
     
    This download is mandatory for liveries that are referenced by it as it contains shared common files that are required to change the appearance of common FSL A319 parts used in these repaints.
     
    About this file
     
    This is a shared library of modified textures that contains common files for the custom 4K PBR A319 v5.0.1.100+ paint kit created by Hugo Bicho, Daniel Du Preez and John Tavendale.  A new Airplanes\FSLabs A319\Texture.CommonProfHBJT folder has been created and common files shared with all repaints are included here.  This saves on drive space and simplifies management of liveries created from the custom kit.  Repaints made from this kit have a special texture.cfg file that references this folder as a fallback and will be shown on the model when loaded into P3D.
     
    Installation instructions:
     
    1.       Drag the FSLabs A319 folder contained in this download to your {Prepar3D v5 (or v4) Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes folder
     
    2.       After installation, your {Prepar3D v5 (or v4) Add-ons}FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A319 should look like this:
     
     
     

    3.       Installation is complete!  You do not need to repeat this for any additional liveries that require this download if you’ve already completed the steps above
     
    Changes since last version:
     
    16/10/2020 (v1.0)
     
    RTW build, development changes not tracked publicly Features:
     
    Fuselage
    WIP Wings / Horizontal Stabiliser
    Custom 4K wing albedo and PBR textures with optional flap scuff plating dependent on airframe Custom 4K baked ambient occlusion (AO) textures for metallic (PBR) maps Custom 4K normal maps with accurate 3D panelling details Reworked flap track fairings and wing panelling Improved wing shading and colour Reworked horizontal stabiliser textures Engines
    Custom CFM and IAE engine albedo and PBR textures with panelling and rivets Improved CFM and IAE engine intake areas with PBR effects Custom baked ambient occlusion (AO) textures for metallic (PBR) maps Custom normal maps with accurate 3D panelling details Reworked engine pylons that match wing colour more accurately PBR effects on pylon metallic parts Miscellaneous
    Reworked wheel, gear hub and landing gear strut textures PBR effects on landing gear Custom fuselage, door and engine overlay textures with PBR effects Custom cargo bay interior textures Custom cabin and galley textures  
    Copyright and legal:
     
    This work is protected by international intellectual property and copyright laws.  Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the authors.  A lot of time and effort was spent creating this kit.  Please respect our work.
     
     
     
    Hugo Bicho (hugo.bicho@hotmail.ch) - HB Textures https://www.facebook.com/hbtextures
     
    Daniel Du Preez (professormadman@gmail.com) - https://goo.gl/Ji9kH5
     
    John Tavendale - Textures by Tavers https://www.facebook.com/texturesbytavers

    1012 downloads

    Updated

  2. Copilot Expansion Auto Step Climb For FSLABS A32X

    Hi everyone,   We all know that FSlabs team is working on Step Climb function, and we all expect that but until then, I created a small custom expansion of the Copilot Lua Script from @Peter Pukhnoy in order to automatically step to higher level, especially if you are flying a red eye/long haul flight with the A321 and sleep next to the PC :-)   How it works : This Auto Step Climb lua script periodically reads the REC MAX ALT in MCDU PROG Page of pilot monitoring MCDU every 45 minutes. This reading only works in CRUISE Mode and between predefined Flight levels - by default between 29000 and 41000). If at any point in flight, the cruise level is less than this *REC MAX ALT* 3000 feet which means we can execute the climb (+ 2000 feet) and still below the MAX ALT 1000 feet. The ALT knob will be rotated to the right twice and will be pushed to execute the CLIMB (this ALT knob will also be switched to 1000 increment, in case it was left at 100).   How to Enable / Disable Auto Step Climb (ASC) ?  To make life easier without having to modify values in the config file and restart the Copilot Module each time you want to enable/disable ASC, I decided ASC IS ONLY ENABLED IF the A/P button of Pilot Monitoring (PM) is engaged, the Pilot Monitoring side (left or right) can be set in options.ini file of Copilot (PM_seat value).  For example, if you set "left" for PM value in options.ini, then this ASC only works if Autopilot 1 is engaged (virtually means you handle all the works to the P.M (left seat) and go to bed), and simply engage your Autopilot 2 when you are back to the control and want to disable it. And yes, you can switch freely between AP1 and AP2 in flight without any problem. Recommend to only engage P.M's Autopilot when you want to enable ASC.   Installation : Download and install Copilot LUA SCRIPT  Download *asc_custom_auto_step_climb.lua* file in the attachment and put it into FSUIPC\FSLabs Copilot\custom folder. That's it! Logs:   All the actions of Auto Step Climb are logged with specific time, you can find the details here : FSUIPC\FSLabs Copilot\custom\Copilot.log [08:00:06] [info] [STEP CLIMB LOG] : <AUTO STEP CLIMB DISABLED> - REASON : A/P OF PILOT MONITORING IS NOT ENGAGED [08:45:14] [info] [STEP CLIMB LOG] : <AUTO STEP CLIMB ENABLED> - STEP CLIMB EXECUTED FROM : 30954 TO 32954 - REC MAX ALT RECORDED : 34000 [09:30:16] [info] [STEP CLIMB LOG] : <AUTO STEP CLIMB ENABLED> - STEP CLIMB NOT POSSIBLE - CURRENT FL : 33015 / MAX FL : 34500 PM or comment me if you have any feedback or question or any idea to improve this small piece of code.
    Happy "Step Climb" Guys!   

    49 downloads

    Submitted

  3. Common Files for FSL A320 v5.0.1.100+ Custom 4K PBR Paint Kit

    !!! NOTE: READ THESE INSTRUCTIONS CAREFULLY !!!

    *** FOR FSL A320 v5.0.100+ ONLY ***

    This download is mandatory for liveries that are referenced by it as it contains shared common files that are required to change the appearance of common FSL A320 parts used in these repaints.

    About this file

    This is a shared library of modified textures that contains common files for the custom 4K PBR A320 v5.0.1.100+ paint kit created by Hugo Bicho, Daniel Du Preez and John Tavendale.  A new Airplanes\FSLabs A32X\Texture.CommonProfHBJT folder has been created and common files shared with all repaints are included here.  This saves on drive space and simplifies management of liveries created from the custom kit.  Repaints made from this kit have a special texture.cfg file that references this folder as a fallback and will be shown on the model when loaded into P3D.

    Installation instructions:

    1.       Drag the FSLabs A32X folder contained in this download to your {Prepar3D v5 Add-ons}\FlightSimLabs\FSLabs\SimObjects\Airplanes folder

    2.       After installation, your {Prepar3D v5 Add-ons}FlightSimLabs\FSLabs\SimObjects\Airplanes\FSLabs A32X should look like this:



    3.       Installation is complete!  You do not need to repeat this for any additional liveries that require this download if you’ve already completed the steps above

    Changes since last version:

    23/07/2020 (v1.0)

    RTW build, development changes not tracked publicly Features:


    Fuselage
    Custom 4K fuselage with accurate Airbus window shape and metallic frames, seam panelling, fuselage section joins and rivets Custom wing box with correct panelling and rivets, flap actuator mechanism and flap scuff plates Custom 4K metallic maps (PBR) Custom 4K baked ambient occlusion (AO) textures for metallic (PBR) maps Custom 4K normal maps with accurate 3D panelling details Enhancements to cockpit window area and cockpit window side sill Enhancements to APU service door area Custom trim plates and trim guide mechanism New wiper blades featuring custom PBR Anti-glare paint strip on nosecone area in front of cockpit windows New vertical stabiliser with accurate panelling and rivet configuration Dirt effects Wings / Horizontal Stabiliser
    Custom 4K wing albedo and PBR textures with optional flap scuff plating dependent on airframe Custom 4K baked ambient occlusion (AO) textures for metallic (PBR) maps Custom 4K normal maps with accurate 3D panelling details Reworked flap track fairings and wing panelling Improved wing shading and colour Reworked horizontal stabiliser textures Engines
    Custom CFM and IAE engine albedo and PBR textures with panelling and rivets Improved CFM and IAE engine intake areas with PBR effects Custom baked ambient occlusion (AO) textures for metallic (PBR) maps Custom normal maps with accurate 3D panelling details Reworked engine pylons that match wing colour more accurately PBR effects on pylon metallic parts Miscellaneous
    Reworked wheel, gear hub and landing gear strut textures PBR effects on landing gear Custom fuselage, door and engine overlay textures with PBR effects Custom cargo bay interior textures Custom cabin and galley textures
    Copyright and legal:

    This work is protected by international intellectual property and copyright laws.  Any unauthorised use, dissemination and/or distribution of the content of this download is prohibited without the prior written consent of the authors.  A lot of time and effort was spent creating this kit.  Please respect our work.


     
    Hugo Bicho (hugo.bicho@hotmail.ch) - HB Textures https://www.facebook.com/hbtextures

    Daniel Du Preez (professormadman@gmail.com) - https://goo.gl/Ji9kH5

    John Tavendale - Textures by Tavers https://www.facebook.com/texturesbytavers

     

    4361 downloads

    Submitted

  4. MCP HDR whitelight fix

    This file included a texture replacement to fix the white MCP button lights which are supposed to be green but due to P3Ds v4 HDR they are white.
    Read-me included. Screenshots attached below (P3D v4 HDR on)
    These are my HDR settings -
    HDR_BLOOM_THRESHOLD=3.000000
    HDR_BLOOM_MAGNITUDE=0.000000
    HDR_BLOOM_BLUR_SIGMA=0.800000

    Donations are not necessary but always appreciate a cup of coffee you donate by clicking here - https://www.paypal.me/hardiq10
    Hope you enjoy the sounds! more coming up!
     
    TOGAMods


    337 downloads

    Submitted

  5. PMCO - Pilot Monintoring Callouts

    A new set of sounds (female pilot monitoring, UK accented) of callouts. Refers to the new version of PMCO (as of June, 2020).

    246 downloads

    Submitted

  6. Copilot lua script

    Registered FSUIPC 5.154 or later is required.
    Features:
    Actions such as setting the trim and flaps after engine start. Callouts - 'V1', 'rotate' etc. Optional voice commands for triggering some of the actions Installation
    Detailed list of procedures
    Special thanks to @Hannes Altmann and @Nick Kidd for recording the callouts.

    466 downloads

    Updated

  7. Complementary PMCO sounds

    First of all, you need to download and install the "PMCO - Pilot Monitoring Callouts" tool by Nils Unger available here:
    These files have been recorded and mixed to make the ambiance more immersive in your FSLabs A3XX cockpit and to make you seated beside a man or a woman first officer.
    You have the choice between several accents according to the airline you want to fly. These files has been created as text to speech voice.
    Hope you will enjoy them!

    388 downloads

    Submitted

  8. JetBlue A321 wingfence equipped and caution tailstrike

    Here are the A321 stickers you would find in the cockpit of a JetBlue Mint A321. 
    INSTALLATION: Just drop this file into any texture folder of any FSLabs aircraft (more instructions in download)
    Thanks so much and if you have any questions, just list them below! 
    Cheers and Happy Landings! 

    141 downloads

    Submitted

  9. A321 "CAUTION TAILSTRIKE" VC Decal

    A321 "CAUTION TAILSTRIKE" Decal
    Modeled after a decal found on the American Airlines A321 fleet. Points out to the pilot to keep in mind they are in the stretched variant. Especially useful for mixed fleet flying where you could spend 3 days buzzing around in an A319 and then get your fourth day in the A321.  Just paste into the Texture.xx folder you wish to use the decal on.



    245 downloads

    Submitted

  10. A321X VC Rain Tomato

    Tomato A321 VC Rain Only 
    only for better rain reflection on windshield.
    !!!ignore the error warnings when installing!!!
     
    Enable VC Tomato under MCDU Option Visuels

    400 downloads

    Updated

  11. Cabin ready sounds

    These files have been recorded and mixed to make the ambiance more immersive in your FSLabs A3XX cockpit.
    These voices replace the Norman's one to tell you when the cabin is ready for take off or landing. You have the choice between several accents according to the airline you want to fly.
    You will first hear my voice saying "go ahead" followed by the flight attendant voice mixed with a light radio effect because it has been created as text to speech voice.
    Enjoy!

    750 downloads

    Submitted

  12. TomatoShade Profile for v434 A319/A320 - TomatoSalat's Work

    NOT MY WORK - ALL CREDIT GOES TO TOMATOSALAT - I HAVE BEEN GIVEN PERMISSION TO REUPLOAD AS DROPBOX ISN'T AS RELIABLE
     
    I will try and mirror this to the downloads he posts at his Discord. For more info the Tomato Shade Discord server can be found here: https://discord.gg/YQefUbv
     
    Enjoy!
     
     

    8178 downloads

    Updated

  13. Tomato A3xx VC Rain Only v2.0.2.415

    Tomato A3xx VC Rain Only 
    only for better rain reflection on windshield.
    !!!ignore the error warnings when installing!!!

    650 downloads

    Updated

  14. German voice pack for the 'Pilot Monitoring Callouts' FSUIPC plugin

    This is a replacement voice pack for the 'Pilot Monitoring Callouts' FSIUPC plugin:
    https://forums.flightsimlabs.com/index.php?/files/file/1815-pmco-pilot-monitoring-callouts/
    Huge thanks and credit to @Hannes Altmann who recorded the callouts!
    The sound pack was tested using the default volume levels in the FSLabs MCDU.
    Installation:
    Drop the folder from the archive into 'Prepar3d v4/Modules', agreeing to overwrite the existing files.
    You will probably want to increase the volume in PMCO.lua above the default 65% as these sounds are a bit quieter than the default computer generated sounds.
     

    132 downloads

    Updated

  15. speed callouts PMCO - Pilot Monitoring Callouts

    This is a freeware Lua script, which automatically plays the callouts you would hear from the
    pilot monitoring (PM) in an Airbus flight deck during takeoff and landing (including rejected
    takeoff, go-around and touch-and-go).
    It can be used together with the A319, A320 and A321 add-ons.
    Questions and discussion:
    Demo Videos:
    Note: (bad performance in videos may come from recording, in-sim performance was good)
    Installation:
    - Please follow the included readme.
    What it does:
    - The script runs automatically upon loading the FSLabs Airbus (if FSUIPC profiles are set up correctly).
    - Upon advancing the thrust levers for takeoff, the PM will open the PERF page on his MCDU, allowing the script to fetch the takeoff speeds.
    - The following callouts are included:
      # Takeoff: FLEX SET / TOGA SET, 100 KNOTS, VEE ONE, ROTATE, POSITIVE CLIMB, CLIMB SET
      # Landing: SPOILERS, REVERSE GREEN, DECEL, 70 KNOTS
      # Gear confirmation: GEAR UP, GEAR DOWN
      # Flaps confirmation: FLAPS UP, FLAPS 1, FLAPS 2, FLAPS 3, FLAPS FULL
      # Special: STOP (rejected takeoff), STAND UP, GO (touch-and-go)
    - The script recognizes the phase of flight to play the correct callouts. Multiple legs are possible.
    Credits:
    - The fetching of the MCDU V-speeds is the work of @Peter Pukhnoy. Huge thanks to him for his contribution to this project.
    - The free Lua socket library is made by Diego Nehab. It is available at https://github.com/diegonehab/luasocket .
    - Free TTS sounds included in this package are recorded from ttsmp3.com (British English / Brian).
    - Included UK real voice pack was recorded by @Nick Kidd. Thank you!
    Important Notes:
    - Registered version of FSUIPC is REQUIRED!
    - This was only tested on Prepar3D 4.x, FSUIPC5 and together with the FSLabs A320X addon (A319, A320 and A321).
    Disclaimer:
    This script is free software. It comes without any warranty. Use this at your own risk. I am not responsible for anything you do with it, or for any possible damage that comes out of using it.
    You can modify the script for your own personal use, but I ask you to refrain from redistributing it without my permission. Thank You.

    1411 downloads

    Updated

  16. Alternate colors

    This file provides alternate colors for :
    - Grey color (PFD)
    - Blue horizon color (PFD)
    - Brown horizon color (PFD & ISIS)
    - Green color (PFD, ECAM, MCDU)
    - Magenta color (PFD, ECAM, MCDU)
     
    You'll find a backup folder with the original file and the (rather simple) instruction to install the one I modified.
    Note that if you like it, you'll have to reinstall it after each FSLabs update.


    1177 downloads

    Updated

  17. Enhanced airport ambiance sound

    This file is the same as the original one with some takeoff, landing and taxiing aircrafts sounds mixed. See the readme file for installation.
    Hope you will enjoy it.

    535 downloads

    Submitted

  18. Unofficial FSL Tomatoshade Reflection Profiles for v347

    These are updated Tomatoshade profiles to work with the FSL A320-X and A319-X v347.
    IAE and CFM profiles for both A319-X and A320-X VC profiles - including an option for VC RAIN which enhances the rain effect

    4658 downloads

    Updated

  19. FSLabs Airbus VC HD font

    This the HD replacement of original pedestal fonts for all FSLabs Airbus models.

    1346 downloads

    Updated

  20. P3D TOGAvc (IndiGoAirlines) Custom VC Textures

    ReadMe included! Custom VC textures for IndiGo Airlines A320 (includes all sorts of stickers placed at correct positions) some stickers might be missing since I could not find some HD pictures if you have any Cockpit pics of the IndiGo A320 do mail me!
    Due to copyright issues, it is not possible to add the Airbus logo to the manuals, I am researching if I can add the logo to the map light knobs..
    ENJOY more comping up for various carriers!
    TOGAvc
    Older pics below will update soon and remove this message..




    129 downloads

    Updated

  21. Unofficial FSL Tomatoshade Reflection Profiles for v266

    These are updated Tomatoshade profiles to work with the FSL A320-X and A319-X v266.
    Note that these are unofficial profiles based on the official v1.2 profiles by @Andrew Wilson.

    1174 downloads

    Updated

  22. Replacement Remote MCDU for iPad

    These are replacement mcdu.html files for optimal experience on iPads. 
    For more information, please read included PDF file.
    Enjoy!
     

    1274 downloads

    Updated

  23. Alternate CFM "BUZZ" sound

    Alternate CFM buzz sound recorded from a real Air France A318 with filtered noise.
    As these sounds are more realistic in cockpit view, I wanted to share them to make you enjoying more and more this great aircraft. See the included txt file for install.
    Frederic Nadot

    735 downloads

    Submitted

  24. FSL A319-X Tomato Shader Profile

    Tomato Shader profiles for the FSL A319-X CFM/IAE variants. 

    1014 downloads

    Updated

  25. RD FSL A32X VC Mod

    RD FSL A32X VC Mod'™ 
    README:
    This is a High quality  Screen Reflection texture,Carpet replacement,Checklist placement,Logo replacement and ND/PFD Display colour correction profile for the FSL A32X.
    This Includes:
    -VC Screen Reflection Texture
    -PFD Colour profile
    -Carpet realistic without the FSL logo
    -Checklist on sides of the pestal in Checklist Holder
    -Airbus Logo on Manuals
    -------------------------------------------------------------------------------
    1.ND/PFD Reflection Mod Installation: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC
      ND/PFD Reflection Mod: Files: VCDisplay.dds
    -------------------------------------------------------------------------------
    2.ND/PFD Display colour profile Installation: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\A320\Data
      ND/PFD Display colour profile Files: LCDColours.ini + LCDPens.ini
    -------------------------------------------------------------------------------
    3.Carpet & Carpet VC without FSL Logo's Installation:: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC
      Carpet & Carpet VC: Files: Carpet.dds + CarpetVC.dds
    -------------------------------------------------------------------------------
    4.Checklist in Checklist Holder + Airbus Logo on Manuals Installation:: C:\Users\YourName\Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A32X\Texture_VC
      Checklist in Checklist Holder + Airbus Logo on Manuals: Files: VC-3_t.dds + VC-1_t.dds
     
     *If you fly from CPT side use the VC-3_t.dds from the CPT Side folder
       and if you fly from FO side use the VC-3_t.dds from the FO Side folder* 
    -------------------------------------------------------------------------------
    Credit to Daniel welsh and Thomas Klein helping to suppyling some of these files!
    +Do not upload / share this file without permission from Robin C and/or Dean Or FSL

    Feel to visit our website.
    https://www.rdpresets.com
    ----------------------------------------------------------------------------------
    Thank you for choosing the RD FSL A32X Mod!
    - Dean J & Robin C
     




     




    5830 downloads

    Updated


×
×
  • Create New...