There is a preset for these events in the mobiflight software for APU Master and APU Start which works, however there are not any presets for any other button on the upper panel.

It was suggested that the preset code comes from the proprietary FS Labs WASM module and to contact FS Labs for help.

the preset codes are:

(>K:FSL.EVENT.OVHD.APU.MASTER.PUSH)

(>K:FSL.EVENT.OVHD.APU.START.PUSH)

Can someone help me find the info I need to create the preset codes for all push buttons so I can complete configuring?

A year after getting back into Flight Simming, and going down the WinWing / Rowsfire etc route, i find myself wanting more for my in-home immersion. To that end, I've reached out to Skalarki and I'll hopefully be buying the Single Person Ped, MIP, and possibly the overhead soon, With the sidestick etc to follow as and when I can afford them.

My current plan is to add the following to my system:

3 x 55" OLED Monitors for the Forward Views

1 x 5.1 Surround System

1 x Flight Sounds Dual Pro (or maybe a single for now) GA Audio Interface

1 x Bose Proflight2 Headset

I've also got a good lead on an A320 Captains Seat that will hopefully work out, but not holding my breath on that one!

Anyway - I'm writing here as I have a few (million) questions and I know that a good few FSL Users and Testers have similar setups. I feel like I've pestered Skalarki's team to the point of annoyance on the options etc for purchase, but what I'm really looking for are end-user thoughts, opinions, pitfalls, and challenges... So some questions if I may?

1. Forward Views

How do you set yourself up with these so that your vision is accurate for the forward view? 
Can you get rid of the VC? 
Does getting rid of the VC improve performance?

2. PFD / ND / ECAM

Does the Skalarki Software handle the positioning of the ND / PFD / ECAM Screens for you or do you still resort to PopOutManager?

If you have gotten rid of the VC for the Forward Views, how does this work?

3. Sound

There's no doubt in my mind that moving to a surround system will be a bonus, but do any of you have any points or pitfalls to suggest that i look out for?

Does anyone use any of the Flight Sounds kit? I'm MSFS2024 and Say Intentions, do the Volume Controls, etc work well with the Skalarki Hardware and SI, etc?

Re-routing Comms output to say the Internal Speaker - Do you add a speaker - Is switching over to that doable with the Skalarki kit / MSFS?
 

Lastly, as I said, I'm looking for end-user thoughts and opinions here and things to beware of, so by all means, even if it's not necessarily relevant to my questions above, I'm all ears!
 

My goal is that I get as much as possible functional before the Skalarki kit arrives so that I can install it, and set it up with the minimum of fuss and faff. 

Thank you all so much in advance for any assistance that you can offer.

Best

Smiffy

I started building in July after coming over to PC from XBox.

Parts list:

LG Evo C5 OLED TV

2x 27in Spectre monitors (on L monitor I have an open browser and BATC. R monitor I have FO MFD displayed with Navigraph for moving map)

1 15in generic portable monitor for PFD/MFD

2 Samsung Tablets, one for EFB and one for upper and lower ECAM (I use Spacedesk to use them as monitors)

WINCTRL: URSA Minor L joystick, 32 Throttle/PAC, ECAM, MCDU, AGP, 3X0 Glareshield

Rowsfire A107 v2 Overhead

TM TFRP for rudder pedals (Currently have WINCTRL pedals on preorder)

Looking forward to sharing more pics as this evolves.:)

Package content:

- A320-232 MIP CS side

- HOMELine - Speaker Panel CS

- HOMELine - EFIS Controls CS

- PROLine T on ND Panel

The quality as always top-notch! More stuff will come later. Now back to CAD for further design of the structure . 

I will update later on progress.

Its been two months since I’ve ordered it and about 1 month ago they said that my product is delivered and gonna give me a tracking.

From then, I now don’t have further information. I kept sent a DM and from last week they now don’t even read my message.

I’ve tried calling them, and of course no answer.

If someone knows any way to contact them, or having a similar problem, please help me.

I feel I got scammed.

which of the high-end sidesticks would you recommend? I fly the A320/321 as Captain and therefore would like to have a natural feel back at home as well.

I would not like to buy twice as if PROSRV 2.0 will not feel right, then 1000 eur is wasted and will have to buy 3.0 anyhow.

I keep an eye on:

1. ACC PROSRV 3.0

https://www.acc.world/store/p2/Sidestick_320_PROSRV3.0.html
 

2. FSC.it

FSC sidestick

3. genuine OEM sidestick CAPT

https://sim-on-a320.com/blog/tag/sidestick/

as found on Ebay:

https://www.ebay.com/itm/A320-A330-Controller-Assembly-Side-Stick-PN-321000-M03-MFR-F0222/324179913596?hash=item4b7aa0eb7c:g:fGYAAOSwKJpezqop

4. ACC PROSRV 2.0

https://www.acc.world/store/p1/Sidestick_320_PROSRV2.0_.html

5. FlightDeckSolutions

https://flightdeck-solutions.myshopify.com/collections/a320/products/a320-pro-mx-series-sidestick

6. Skalarki

https://www.skalarki-electronics.eu/onlineshop/product/240-side-stick-p-p.html

Steve

Thanks 

Jamie

SIM GAUGES Airbus A320 OVH Panel – Flight Simulator Hardware for MSFS/XPLANE – Sim Gauges

Thanks a lot

Laurent

My Bravo throttle Quadrant was held in customs for an extra 10 days as I had to explain to "security" apparatus that it was for Simulation/Entertainment, and then proceed to pay 100% customs and fees so cheap becomes expensive, and Skalarki becomes very expensive.

Nonetheless, I have questions to all who have been enjoying their products.

Is it possible to get you to post pictures as to how they "live" on or around  your desks?

I am looking at ordering the FCU, MCDU, and the home line left pedestal package (modified I hope to somehow fit the TCAS module), and would like an idea of how they "fit" in your environments.

I am particularly interested in the home line pedestal package as I need to figure out where it goes next to my chair, and if I need to "add" support to make it sit up high enough from the floor for me to reach it comfortably.

Thanks in advance for any insight on this.

My way to home cockpit started a few months ago by deciding to build a pedestal.

Previously having excellent desktop Skalarki FCU, MCDU and ABRK products, I decided to get more stuff from them.

I got RMP, ACP, Flood panel, Wx radar panel, Atc panel, Ecam and switching panel. Pedestal, printer and other panels I build myself. I am also using Thrustmaster TCA for now.

The pedestal is ready for future expansions but it looks that from here the next project will be side stick console

As in the title; Now that FSLabs is released in msfs 2024, is there any reason why I should not make the jump to msfs 2024 and delete msfs 2020 altogether? My homecockpit is 100% used for FSLabs and I am just abandoning P3Dv5 because I'm not able to resolve CTD upon loading FSLabs in P3D. Instead of doing a full PC re-install I have have decided it is time to move on. I've done a little bit of experimenting with FSLabs in 2020 but I have not made any futher investments yet in msfs2020. I don't have/want storage to run both 2020 and 2024 in parallel on my PC. I'm just looking to achieve maximum immersion with my homecockpit regarding flightmodel and systems. I don't care about any game/career related features.

Any (homecockpit experience based) advise would be appreciated.

Vincent

Update:

I've made the jump to 2024 and so far so good. Very good loading times and zooming along nicely with the FSLabs NEO. Improved performance compared to MSFS2020. I'm ready to say farewell to P3D and MSFS2020.

Is it possible to remove the inside cockpit from the main view such that all I see presented is what is outside the window?  JeeHell FMGS and Pro-Sim do this, but I want to keep using FSLabs.  Is there a way to make this work?

     Í want to know how I can assign two sidesticks (left and right) in the msfs2024’s control settings, in order to differentiate them and be able to have “priority left/right” logic.

thank you. 

Only issue that I have is that it seems that, when starting a new flight, when I press "connect to hardware" with plane on C&D, my panels PUB and knobs randomly initiate. Sometime adirs PB are off, strobes or other lights switch to on, packs might be off etc... It takes a little bit of time at each flight to check if there is no issue.

Most of the time, everything gets back into order (even if it would be better if it was more stable ) . Only remaining issue is with the 100/1000 switch on the glare shield alt selection knob. If physically my selector is on "1000" but the init put it on "100", then I will never be able to sync it. Putting it physically to 100 will switch it to 1000 on the aircraft and so on.

For info, I have MCDU, Radio, ATC, Glare, Mini OVH.

For now this init issue only hapenned with glare and mini ovh

I recently bought this device and I have to say I am thrilled - it works without any problems (plug and play)
Unfortunately not with the FSlab A32x products.
I would be delighted if FSLabs would also co-operate with Wingflex and create a FSLabs / Wingflex connection.

pls consider this

Thank you in advance

I used Throttle from FlightPM, and encountered several problems (I contacted the seller) but there was no response

I found this module and it can be set via FSUIPC6 which I use and it runs smoothly but

some functions are missing, such as:

1. Start Engine 1 (on & off)
2. Start Engine 2 (on & off)
3. (for Engine selection)
1. Crank
2. Normal
3. Start

Any chance of this being added to the Module? Can you help me?

I can choose directly in P3D or in the FSUIPC Menu but none of the options above make some of my Throttle functions not work. I really hope for help, I have given up hope, contact the seller FlightPM. they ignore me.

FSLA321_SL.MCRO FSLA320_SX.MCRO FSLA320_SL.MCRO